To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:45)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the bottom of the shock (1:02)
    • Unbolt the two bottom bolts securing the shock.
    • Use a breaker bar and a 21 mm socket and some penetrating oil.
    • You might need a hammer to work the bolts out once you have removed the nuts.
    • Use a pry bar to pry the spindle free from the strut
  3. step : Remove the top of the strut (1:40)
    • Pop the hood and secure it.
    • Use your 13 mm socket and ratchet and some penetrating oil to remove the three bolts securing the top of the strut.
    • Pull the strut down and out.
  4. step : Install the new strut (2:10)
    • Work the strut into place and bolt in the top three 13 mm bolts
    • Torque the three 13 mm nuts to 35-45 ft lbs
    • Bolt in the bottom two nuts and bolts and torque to 100 ft lbs.
  5. step : Replace the wheel (3:46)
    • Put the wheel back on and hand tighten the lug nuts
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:55 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 21mm Socket



This part replaces:

  • Monroe 171670

Vehicle Fit

  • 2000-2012 Chevy Impala Front Strut & Spring Assembly for Police & Taxi Models Driver or Passenger Side excluding 18 Inch Wheels
  • 1998-2002 Olds Intrigue Front Strut & Spring Assembly Driver or Passenger Side
Part #: 1ASTS00566

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More