In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:13)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the bottom of the shock (1:30)
    • Unbolt the 10 mm securing the ABS sensor to the strut.
    • Unbolt the two bottom bolts securing the shock.
    • Use a breaker bar and 24 and 21 mm sockets and some penetrating oil.
    • You might need a hammer to work the bolts out once you have removed the nuts.
    • Use a pry bar to pry the spindle free from the strut
  3. step : Remove the top of the strut (3:58)
    • Pop the hood and secure it.
    • Use your 13 mm socket and ratchet and some penetrating oil to remove the three nuts on the 10 mm bolts securing the top of the strut.
    • Pull the strut down and out.
  4. step : Install the new strut (3:38)
    • Work the strut into place and bolt in the top three 13 mm nuts
    • Torque the three 13 mm nuts to 20-25 ft lbs
    • Bolt in the bottom bolt and 24 mm nuts and torque to 120 ft lbs.
    • Fasten the ABS sensor to the strut using your 10 mm socket and ratchet.
  5. step : Replace the wheel (7:33)
    • Put the wheel back on and hand tighten the lug nuts
    • Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 24mm Socket
  • 21mm Socket
  • 19mm Socket
  • 13mm Socket
  • 10mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Easy Install, Rides like new
The struts went in fairly fast, they were high quality parts. I was impressed with how fast A1 got them to me an the cost was low. The old lesabre rides like new now. If you do this job yourself keep in mind you will need to get an alignment done after, that cost me an extra 100 bucks when it was over, but well worth it.
July 8, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Do they fit a 93 seville?
Cornelius S on Jun 9, 2017
BEST ANSWER: We do not currently carry this part for your vehicle. You can try searching a website called Partfinder.com, which you can find here: http://www.partfinder.com. If you have any questions about other parts we carry, please feel free to give us a call or send us an email.
Ford service was not able to perform a wheel alinmen, the camber was like + inches monroe 171822 ?
what do i do?
Gabino on Jul 20, 2017
BEST ANSWER: I would recommend seeing about getting a replacement pair, or in some cases there is a camber adjustment kit that you may install to assist in alignment.

How-to Video:

(08:08 min)

Tools List:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 24mm Socket
  • 21mm Socket
  • 19mm Socket
  • 13mm Socket
  • 10mm Socket



This part replaces:

  • Monroe 181822
  • Monroe 171822
  • KYB SR4022

Vehicle Fit

  • 1990-1999 Buick LeSabre Front Strut & Spring Assembly Pair
  • 1991-1996 Buick Park Avenue Front Strut & Spring Assembly without Air Suspension Pair
  • 1991-1993 Cadillac Deville Front Strut & Spring Assembly without Air Suspension Pair
  • 1991-1993 Cadillac Fleetwood Front Strut & Spring Assembly without Air Suspension Pair
  • 1990-1999 Olds 88 Front Strut & Spring Assembly without Air Suspension Pair
  • 1991-1998 Olds 98 Front Strut & Spring Assembly without Air Suspension Pair
  • 1991-1998 Olds 98-Regency Front Strut & Spring Assembly without Air Suspension Pair
  • 1990-1999 Olds Delta 88 Front Strut & Spring Assembly without Air Suspension Pair
  • 1992-1995 Olds Delta 88-Royale Front Strut & Spring Assembly without Air Suspension Pair
  • 1997-1999 Olds LSS Front Strut & Spring Assembly Pair
  • 1991-1998 Olds Regency Front Strut & Spring Assembly without Air Suspension Pair
  • 1990-1999 Pontiac Bonneville Front Strut & Spring Assembly without Air Suspension Pair
Part #: 1ASFK00034

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More