In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:13)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the bottom of the shock (1:30)
    • Unbolt the 10 mm securing the ABS sensor to the strut.
    • Unbolt the two bottom bolts securing the shock.
    • Use a breaker bar and 24 and 21 mm sockets and some penetrating oil.
    • You might need a hammer to work the bolts out once you have removed the nuts.
    • Use a pry bar to pry the spindle free from the strut
  3. step : Remove the top of the strut (3:58)
    • Pop the hood and secure it.
    • Use your 13 mm socket and ratchet and some penetrating oil to remove the three nuts on the 10 mm bolts securing the top of the strut.
    • Pull the strut down and out.
  4. step : Install the new strut (3:38)
    • Work the strut into place and bolt in the top three 13 mm nuts
    • Torque the three 13 mm nuts to 20-25 ft lbs
    • Bolt in the bottom bolt and 24 mm nuts and torque to 120 ft lbs.
    • Fasten the ABS sensor to the strut using your 10 mm socket and ratchet.
  5. step : Replace the wheel (7:33)
    • Put the wheel back on and hand tighten the lug nuts
    • Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 24mm Socket
  • 21mm Socket
  • 19mm Socket
  • 13mm Socket
  • 10mm Socket

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Strut and spring
The parts fit perfectly, and they arrived at my house less than 24 hours after I ordered them. Very pleased
February 28, 2018
Purchased
6 months ago
Easy Install, Rides like new
The struts went in fairly fast, they were high quality parts. I was impressed with how fast A1 got them to me an the cost was low. The old lesabre rides like new now. If you do this job yourself keep in mind you will need to get an alignment done after, that cost me an extra 100 bucks when it was over, but well worth it.
July 8, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 8 answers
Is this a pair of complete struts as stated in add? Pair TRQ SCA56938
Reginald R on May 30, 2018
BEST ANSWER: Yes. It was the whole strut assembly kit already put together. I just took my old ones off and put the new ones on.
Ford service was not able to perform a wheel alinmen, the camber was like + inches monroe 171822 ?
what do i do?
Gabino on Jul 20, 2017
BEST ANSWER: I would recommend seeing about getting a replacement pair, or in some cases there is a camber adjustment kit that you may install to assist in alignment.
Will they fit 94 deville?
Tony J on Mar 20, 2018

Vehicle Fit

Year Make Model Description
1990-1999Buick LeSabre Buick LeSabre Front Strut & Spring Assembly Pair TRQ SCA56938
1991-1996Buick Park Avenue Buick Park Avenue Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1991-1993Cadillac Deville Cadillac Deville Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1991-1993Cadillac Fleetwood Cadillac Fleetwood Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1990-1999Oldsmobile 88 Olds 88 Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1991-1998Oldsmobile 98 Olds 98 Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1991-1998Oldsmobile 98-Regency Olds 98-Regency Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1990-1999Oldsmobile Delta 88 Olds Delta 88 Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1992-1995Oldsmobile Delta 88-Royale Olds Delta 88-Royale Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1997-1999Oldsmobile LSS Olds LSS Front Strut & Spring Assembly Pair TRQ SCA56938
1991-1998Oldsmobile Regency Olds Regency Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938
1990-1999Pontiac Bonneville Pontiac Bonneville Front Strut & Spring Assembly without Air Suspension Pair TRQ SCA56938

This part replaces:

  • Monroe 181822
  • Monroe 171822
  • KYB SR4022
  • TRQ SCA56938
Part #: 1ASFK00034


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SCA56938

How-to Video:

(08:08 min)