Replaces

Strut & Spring Assembly Rear Passenger Side - 1ASTS00813

To ensure the vehicle performs safely and as designed, we recommend replacing shocks & struts in pairs. If the damping rates are significantly different from side to side (like using different brand parts or mixing old with new) the vehicle body and wheel movement variations could cause handling irregularities. We also recommend performing an alignment after replacement. This will ensure proper tracking and protect your vehicle's tires from premature wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:28)
    • Pry off the hub cap with a pry bar
    • Loosen the lug nuts with the vehicle on the ground
    • Raise and support the vehicle
    • Remove the lug nuts
    • Pull the wheel off the hub
  2. step : Removing the Sway Bar Link (1:18)
    • Remove the 12mm bolt from the ABS brake line
    • Pry off the plastic clip from the strut
    • Move the caliper and ABS line out of the way
    • Spray rust penetrant on the upper sway bar link nut
    • Clean the upper sway bar link nut with a wire brush
    • Hold the upper sway bar link nut with a 6mm hex socket and breaker bar
    • Loosen the nut with a 17mm wrench
    • If the nut is stuck, hold the sway bar link ball joint with locking pliers if necessary
    • Remove the 17mm nut
    • Move the sway bar out of the strut
  3. step : Removing the Front Strut (3:22)
    • Remove the two lower 22mm strut nuts
    • Remove the bottom bolt and leave the top bolt in
    • Loosen the three outer 14mm nuts from the top of the strut evenly
    • Remove the nuts
    • Lift the strut up and remove the bottom bolt
    • Remove the strut
  4. step : Installing the Front Strut (7:30)
    • Insert the strut into the strut tower
    • Hand-tighten the top 14mm bolts
    • Lift the knuckle into the strut
    • Insert the two bottom 22mm bolts
    • Hand-tighten the bottom nuts
    • Tighten the 15mm nuts on the top of the strut evenly
    • Torque the upper nuts to 63 foot-pounds evenly
    • Tighten the bottom bolts
    • Torque both bolts to 155 foot-pounds while counter-holding
  5. step : Installing the Sway Bar Link (9:59)
    • Slide the sway bar link where it attaches to the strut
    • Tighten the nuts with an 18mm socket and ratchet
    • Torque the 18mm nuts to 55 foot-pounds
    • Tighten the 12mm bolt to the ABS line
    • Clip in the lines to the knuckle
  6. step : Installing the Wheel (11:04)
    • Slide the wheel onto the hub
    • Start the lug nuts by hand, with the tapered side facing the wheel
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts to 76 foot-pounds in a star pattern
    • Line up the hub cap with the valve stem
    • Push the hub cap onto the wheel

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 17mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 22mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(12:38 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 17mm Socket
  • 22mm Socket

  • Wrenches - Metric

  • 22mm Wrench



This part replaces:

  • Monroe 172309
  • KYB SR4112
  • KYB SR4263

Vehicle Fit

  • 2007-2012 Lexus ES350 Rear Strut & Spring Assembly Passenger Side
  • 2006 Toyota Avalon Rear Strut & Spring Assembly Passenger Side (Built After 12/05 Production Date)
  • 2007-2012 Toyota Avalon Rear Strut & Spring Assembly Passenger Side
  • 2007-2011 Toyota Camry Rear Strut & Spring Assembly Passenger Side
Part #: 1ASTS00813

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More