Replaces

Strut & Spring Assembly Pair TRQ SCA57208 - 1ASSP01125

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:47)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (1:17)
    • Grab the back side of the sway bar with locking pliers
    • Remove the 17mm nut from the sway bar link
    • Remove the sway bar link from the strut
  3. step : Removing the Front Strut (1:51)
    • Remove the 13mm bolt securing the flexible brake hose and ABS harness
    • Remove the lower strut bolts from the spindle with a 15mm open wrench and 21mm socket and breaker bar
    • Tap the bottom bolts out with a hammer
    • Remove the three 13mm bolts on the top of the strut
    • Remove the strut from the vehicle
  4. step : Installing the Front Strut (4:56)
    • Install the strut into the vehicle
    • Tighten the three 13mm bolts to the top of the strut
    • Torque the strut mount bolts to 18 foot-pounds
    • Tighten the 13mm bolts to the bottom of the strut
    • Torque the bolts to 136 foot-pounds
    • Reinstall the 13mm bolts to the ABS harness
  5. step : Installing the Sway Bar Links (2:07)
    • Insert the sway bar link into place
    • Tighten the bar with vise grip pliers
    • Tighten the 17mm nut
    • Torque the top nut to 63 foot-pounds
  6. step : Reattaching the Wheel (7:37)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Bungee Cord

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • Complete Metric Socket Set

4.8 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
1
0
0
0
First, I like to thank you for such of great instructions videos that helped me so much and secondly, I was blessed when I ordered the parts I needed from you. I have been telling everyone I know about your company. The delivery was done in a timely manner. Thank you, thank you very much.
April 27, 2018
Purchased
3 months ago
1ASSP01125
The TRQ Strut &Spring Assembly is great value for quality parts from 1AAuto. However, if you watch the how to video it reads installation for part #ASTS1101,right side when the installation is being done on the left side part #ASTS1100. Same proceedure, parts are well marked. I would highly recommend this strut assembly.

Thanks 1AAuto
April 20, 2018
Purchased
3 months ago
Everything I ordered came earlier then it said !! they fit perfectly I will be ordering my parts as often as I can thank you guys
February 18, 2018
Purchased
5 months ago
top notch service, everything fit
struts fitted right into car without any problems,your installation videos are great refresher to view before starting job. I will shop 1A Auto again for my parts needs ( and have) I will recommend 1A Auto to family & friends for their parts needs. Order arrived in three days your carrier did their job
November 20, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
what brand/ or manufacturer marks these struts?
bill f on Feb 5, 2018
BEST ANSWER: I did not see any markings on them, but they look way better than the stock ones.

Vehicle Fit

  • 2007-2009 Chevy Equinox Front Strut & Spring Assembly Pair V6 3.4L (excluding 19 Inch Wheels) TRQ SCA57208
  • 2007-2009 Pontiac Torrent Front Strut & Spring Assembly Pair V6 3.4L (excluding 19 Inch Wheels) TRQ SCA57208
  • 2008-2009 Saturn Vue XE All Wheel Drive Front Strut & Spring Assembly Pair TRQ SCA57208
  • 2008-2010 Saturn Vue XR Front Strut & Spring Assembly Pair TRQ SCA57208

This part replaces:

  • Hollander 527-00984R
  • Hollander 527-01709R
  • Hollander 527-00985L
  • Hollander 527-01710L
  • Monroe 172527
  • Monroe 172526
  • KYB SR4162
  • KYB SR4161
  • TRQ SCA57208
Part #: 1ASSP01125

TRQ
Brand #: SCA57208

How-to Video:

(08:12 min)