Replaces
Strut & Spring Assembly Pair - 1ASSP00580
1ASSP00580
In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount. Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.
Each complete strut & spring assembly contains:
- Upper Strut Mount
- Strut Bearing
- Coil Spring
- Boot & Bumper Kit
- Gas-charged Strut
Pre-assembled, loaded strut & spring assemblies allow for a quicker, safer install than replacing with just bare struts.
Trouble-Free InstallTrouble-free install includes the matched parts needed to get the job done. New mounts, bearings, springs and hardware will provide a better ride for your vehicle and save you time from not having to do the job again because a used part failed afterwards.
Matched PartsWhen you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance. Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.
Saves Time & MoneyWhen you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)
Lifetime Warranty
This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.
-
step : Remove the wheel (0:57)
- Loosen the lug nuts
- Raise and secure the vehicle
- Remove the lug nuts and wheel.
-
step : Remove the bottom of the shock (1:09)
- Unbolt the 10 mm securing the brake line to the strut.
- Unbolt the two bottom bolts securing the shock.
- Use a breaker bar and an 18 mm socket and some penetrating oil.
- Remove the 18 mm stabilizer link nut.
- You might need a hammer to work the bolts out once you have removed the nuts.
- Use a pry bar to pry the spindle free from the strut
-
step : Remove the top of the strut (2:45)
- Pop the hood and secure it.
- Use your 10 mm socket and ratchet and some penetrating oil to remove the three bolts securing the top of the strut.
- Pull the strut down and out.
-
step : Install the new strut (3:20)
- Work the strut into place and bolt in the top three 13 mm bolts
- Torque the three 10 mm nuts to 20-25 ft lbs
- Torque the 18 mm stabilizer link nut to 85 ft lbs
- Bolt in the bottom bolt and 18 mm nut and torque to 75 ft lbs.
- Fasten the brake line to the strut using your 10 mm socket and ratchet.
-
step : Replace the wheel (5:36)
- Put the wheel back on and hand tighten the lug nuts
- Lower the vehicle and torque the lug nuts to 100 ft lbs using a star pattern
Tools needed for replacement:
- Floor Jack
- Jack Stands
- Ratchet
- Socket Extensions
- Pry Bar
- 10mm Socket
- 18mm Socket
- 19mm Socket
General Tools
Ratchets & Related
Screwdrivers & Related
Sockets - Metric
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (1) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Was this review helpful? Yes (0) No (0)
- Flag as Inappropriate
- Reply
- Inaccurate
- Simeon G on Sep 5, 2017
- Purchased on Mar 18, 2016
- Reply
- Inaccurate
- Heather F on Apr 5, 2017
- Purchased on May 31, 2015
- Reply
- Inaccurate
- Ricardo Q on Feb 4, 2016
- Purchased on Aug 13, 2014
Vehicle Fit
- 2004-2012 Chevy Malibu Front Strut & Spring Assembly Pair
- 2004-2007 Chevy Malibu Maxx Front Strut & Spring Assembly Pair
- 2005-2010 Pontiac G6 Front Strut & Spring Assembly Pair
- 2007-2009 Saturn Aura Front Strut & Spring Assembly Pair
This part replaces:
- Monroe 182200
- Monroe 182199
- Monroe 172200
- Monroe 172199
- KYB SR4095
- KYB SR4094