Replaces

Strut & Spring Assembly Monroe Quick-Strut 271670, 37156 - MNSSP00572

Part Details

  • Quantity: 4 Piece Set

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the rear shocks (1:10)
    • Use an 18 mm wrench and socket and ratchet to remove the two bolts on either end of the shock.
    • The wrench will help secure the bolt while you use your socket and ratchet or impact wrench to get the bolt out.
    • Jack up the control arm a bit to get the top bolt out all the way.
    • Pull the shock down and out of the vehicle.
  2. step : Install your new 1A Auto shock absorber (3:20)
    • Thread the end of the shock up into place on the vehicle.
    • Use your socket and ratchet to bolt in the top of the shock.
    • Use your wrench and socket and ratchet to secure the bottom of the shock absorber.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2005Chevy Venture Chevy Venture Front & Rear Strut & Spring Assembly for Models without Self Leveling Suspension 4 Piece Set Monroe Quick-Strut 271670, 37156
1997-2004Oldsmobile Silhouette Olds Silhouette Front & Rear Strut & Spring Assembly for Models without Self Leveling Suspension Front Wheel Drive 4 Piece Set Monroe Quick-Strut 271670, 37156
1999-2004Pontiac Montana Pontiac Montana Front & Rear Strut & Spring Assembly for Models without Self Leveling Suspension 4 Piece Set Monroe Quick-Strut 271670, 37156
2005Pontiac Montana Pontiac Montana Front & Rear Strut & Spring Assembly V6 3.4L Models for Models without Self Leveling Suspension 4 Piece Set Monroe Quick-Strut 271670, 37156
1997-1998Pontiac Trans Sport Pontiac Trans Sport Front & Rear Strut & Spring Assembly for Models without Self Leveling Suspension 4 Piece Set Monroe Quick-Strut 271670, 37156

This part replaces:

  • Monroe Quick-Strut 271670, 37156
Part #: MNSSP00572

Out of Stock

Monroe Quick-Strut
Brand #: 271670, 37156

How-to Video:

(06:45 min)