Replaces

Strut & Spring Assembly Pair TRQ SCA56932 - 1ASFK00027

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:45)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the bottom of the shock (1:02)
    • Unbolt the two bottom bolts securing the shock.
    • Use a breaker bar and a 21 mm socket and some penetrating oil.
    • You might need a hammer to work the bolts out once you have removed the nuts.
    • Use a pry bar to pry the spindle free from the strut
  3. step : Remove the top of the strut (1:40)
    • Pop the hood and secure it.
    • Use your 13 mm socket and ratchet and some penetrating oil to remove the three bolts securing the top of the strut.
    • Pull the strut down and out.
  4. step : Install the new strut (2:10)
    • Work the strut into place and bolt in the top three 13 mm bolts
    • Torque the three 13 mm nuts to 35-45 ft lbs
    • Bolt in the bottom two nuts and bolts and torque to 100 ft lbs.
  5. step : Replace the wheel (3:46)
    • Put the wheel back on and hand tighten the lug nuts
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 21mm Socket

4.9 / 5.0
20 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
17
3
0
0
0
traverse struts
Struts arrived Tuesday 6/26/2018 afternoon about 5pm. I ordered them Sunday night 6/24/2018 about 8pm. I have not put them on yet. Hopefully I will get them on tomorrow 6/27/2018. I've ordered from 1A before with no complaints.
June 26, 2018
Purchased
1 month ago
Rides like new
Upon receiving the struts and inspecting them, they were in great condition and installation was easy. They were delivered earlier than expected, this was a plus. Had the car aligned right away to make sure it was properly aligned. It was only out by .3 on the right side and .1 on the left. Condition's on each vehicle may vary also. Ours has been maintained and maintenance on a regular basis. Great struts for the price. will be replacing the rears very soon and getting them from 1A Auto as well.
Thanks 1A team for a great product and a great job.
June 2, 2018
Purchased
2 months ago
Century front struts
The order was delivered promptly and was the correct parts. Installation instructions were easy to follow and installation was completed with minor difficulty. completely extended struts had to be compressed with a spring compressor. Called 1A and received help promptly. The struts work fine. Completely satisfied.
May 17, 2018
Purchased
2 months ago
Fit like a glove.
Fitment and ease of installation was great. Video was very helpful and customer service is excellent.
May 12, 2018
Purchased
2 months ago
Thank's alot.
My struts came in just a few days, very fast. I haven't installed
them yet, but they were packaged well and they look good.
I got the front ones and at some point I will want the rears.
Thanks again.
April 16, 2018
Purchased
3 months ago
Struts and springs
They were very simple to install they were sent quickly parts price was affordable
April 9, 2018
Purchased
3 months ago
Easy to install
Went right in my 2004 impala with no issues, after you jack it up and get the front wheels off, it's just 5 bolts, in and out, 2 hours.
April 5, 2018
Purchased
4 months ago
GREAT PRICE!!!
My original strut spring broke so i ordered these, GREAT PRICE and easy to install with the help of a YouTube video ;) I would highly recommend this product! Shipping was fast as well!
April 2, 2018
Purchased
4 months ago
They fit right in and seem to be working fine!
I found the parts on the site quickly and easily, the price was great, the order shipped and was on my door step in a couple of days. Installation was a breeze with all the how to videos on the site. This saved me hundreds of dollars, time and headache not having to deal with a service shop. I plan on doing more buisness here in the future!

Tim Kuklinski
March 23, 2018
Purchased
4 months ago
Quick strut and spring assemblies
Great price, quick shipping... Received the parts and looking to install today. 2007 Chevy Impala
January 27, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 11 answers
Will these fit my 2008 Impala SS with 18 inch rims?
Trey M on Mar 22, 2016
BEST ANSWER: This will fit your vehicle as long as you do not have the police package. Thanks!
Is this a 17inch standard strut set for a 2006 Monte Carlo LT ?
Deshawn E on Jul 8, 2017
BEST ANSWER: Hi Deshawan, yes these struts will fit your car, these struts fit quite a variety of different cars and year's. Being a mechanic since 1976 I have seen this quite often. The struts I installed worked perfect and fit like they were suppose to, hope this info is helpful
What are the max uncompressed and compressed lengths?
B E on Jun 30, 2018
BEST ANSWER: These parts are built to the same specifications as the original struts installed on your vehicle.
Is the price per each or per pair??
Tony T on Apr 18, 2018
BEST ANSWER: The price on this listing is for a pair!
will these fit 06 monte carlo ss with 18 inch rims ?
Alex B on Jan 5, 2018
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Will these struts fit 2004 impala ss with stock 17" wheels?
Torrin D on Jun 20, 2017
BEST ANSWER: Yes, as long as your vehicle does not have a Police package.

Vehicle Fit

  • 2005-2009 Buick Allure Front Strut & Spring Assembly Pair TRQ SCA56932
  • 1997-2005 Buick Century Front Strut & Spring Assembly Pair TRQ SCA56932
  • 2005-2009 Buick LaCrosse Front Strut & Spring Assembly Pair (excluding Super Models) TRQ SCA56932
  • 1997-2004 Buick Regal Front Strut & Spring Assembly Pair TRQ SCA56932
  • 2000-2013 Chevy Impala Front Strut & Spring Assembly Pair (excluding Police Package) (excluding 18 Inch Wheels) TRQ SCA56932
  • 2000-2007 Chevy Monte Carlo Front Strut & Spring Assembly Pair TRQ SCA56932
  • 1997-2003 Pontiac Grand Prix Front Strut & Spring Assembly Pair TRQ SCA56932

This part replaces:

  • Monroe 181661
  • Monroe 171661
  • KYB SR4002
  • TRQ SCA56932
  • Hollander 527-01315
Part #: 1ASFK00027

TRQ
Brand #: SCA56932

How-to Video:

(04:55 min)