Replaces

Strut & Spring Assembly Front Pair Monroe Quick-Strut 171358 - MNSSP00543

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Strut (1:08)
    • Hold the 19mm bolt at the bottom of the strut with a 19mm wrench
    • Remove the 19mm nut with a ratchet and a piece of pipe for leverage
    • Knock the bolt out with a punch and a hammer
    • Remove the three 14mm nuts from the top of the strut
    • Use a hammer to knock the strut out of place
    • Pull the strut down and out
  3. step : Installing the New Strut (2:29)
    • Push the new strut up into place
    • Insert the three 14mm nuts onto the top of the strut
    • Hammer the lower end of the strut into place
    • Push down on the wheel knuckle as you push the 19mm bolt into place
    • Tighten the 19mm nut onto the 19mm nut
    • Tighten the lower nut to 100 foot-pounds of torque
    • Tighten the upper nuts to 25 foot-pounds of torque
  4. step : Reattaching the Wheel (3:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Center Punch
  • Jack Stands
  • Floor Jack
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket

  • Wrenches - Metric

  • 19mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Great prices!!!!
Thank you for the great prices. The items worked out great. I love this site... You saved me $500.00. I will look here first for any parts for my Nissan Armada. Thank again
March 9, 2017
Purchased
12 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:29 min)

Tools List:

    General Tools

  • Center Punch
  • Jack Stands
  • Floor Jack
  • Hammer

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 14mm Socket

  • Wrenches - Metric

  • 19mm Wrench



This part replaces:

  • Monroe Quick-Strut 171358
  • Monroe 171358

Vehicle Fit

  • 2004-2010 Infiniti QX56 Front Strut & Spring Assembly Pair Monroe Quick-Strut 171358
  • 2005-2014 Nissan Armada Front Strut & Spring Assembly Pair Monroe Quick-Strut 171358
  • 2004 Nissan Pathfinder Armada V8 5.6L Front Strut & Spring Assembly Pair Monroe Quick-Strut 171358
  • 2004-2014 Nissan Titan Front Strut & Spring Assembly Pair Monroe Quick-Strut 171358
Only 1 left in stock
Part #: MNSSP00543

Ships Same Day for orders placed by 4 P.M. ET

Monroe Quick-Strut
Brand #: 171358

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More