Replaces

Strut & Spring Assembly Front Monroe Quick-Strut 171594 - MNSTS00137

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Front or Rear Location:   Front

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Why Buy Monroe Quick-Strut Assemblies?

Monroe Quick-Strut assemblies are high quality and easy-to-install. Some of its benefits include:

  • Application specific technology
  • Restores factory ride height and feel
  • Quicker installation time than bare strut assemblies
  • Pre-assembled and no compression tool required
    • Includes new mount, bearing, coil spring, isolators, boot, and strut
  • Nitrogen gas charged

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the top of the shock (1:02)
    • Pop the hood and apply penetrating oil to the top four bolts.
    • Use a 14 mm socket and ratchet to remove the nuts.
  2. step : Remove the wheel (1:35)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the tire
  3. step : Remove the bottom part of the strut (1:52)
    • Apply penetrating oil to your 10 mm brake line bracket bolt, 14mm Stabilizer link bolt and two 18 mm strut bolts.
    • Unbolt the brake line bracket bolt, and then use your 5 mm Allen wrench to stabilize the bolt and work the nut loose with your 14 mm wrench or socket.
    • Continue to loosen, apply penetrating oil, tighten, loosen, apply penetrating oil and repeat until you work it loose.
    • Use a breaker bar or pipe and ratchet to remove the 18 mm bolts.
  4. step : Install the new strut (7:00)
    • Position your strut into place and thread your 6 nuts on.
    • Torque the top four 14mm bolts to 35 ft lbs.
    • Tighten and torque the bottom two bolts to 85 ft lbs.
    • Bolt your stabilizer link back in as well as your brake line bracket.
    • Use your 14 mm socket, ratchet and 5 mm Allen wrench to install the stabilizer link.
    • The brake line bracket can be reinstalled with a 10 mm socket and ratchet.
  5. step : Put the wheel back on (9:50)
    • Replace the wheel and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Floor Jack
  • Large Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 12mm Socket
  • 13mm Socket
  • 11mm Socket
  • 14mm Socket
  • 18mm Socket
  • 19mm Socket
  • 17mm Socket
  • 10mm Socket
  • 16mm Socket

  • Wrenches - Metric

  • 16mm Wrench
  • 15mm Wrench
  • 17mm Wrench
  • 13mm Wrench
  • 12mm Wrench
  • 19mm Wrench
  • 10mm Wrench
  • 18mm Wrench
  • 14mm Wrench
  • 11mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2011Ford Escape Ford Escape Front Strut & Spring Assembly Driver Side Monroe Quick-Strut 171594
2001-2006Mazda Tribute Mazda Tribute Front Strut & Spring Assembly Driver Side Monroe Quick-Strut 171594
2008-2011Mazda Tribute Mazda Tribute Front Strut & Spring Assembly Driver Side Monroe Quick-Strut 171594
2005-2011Mercury Mariner Mercury Mariner Front Strut & Spring Assembly Driver Side Monroe Quick-Strut 171594
Only 1 left in stock
Part #: MNSTS00137


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Monroe Quick-Strut
Brand #: 171594

How-to Video:

(10:29 min)