Specifications:

  • Brand New Rack and Pinion Bellow
  • Fits either LH (Driver Side) or RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheels (1:00)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the wheel
  2. step : Remove the tie rod (1:32)
    • Mark the alignment on the tie rod with a sharpie.
    • Use two wrenches to loosen up the tie rod nut.
    • Remove the cotter pin and remove the 16 mm nut.
    • Use a tie rod puller to pry out the tie rod.
    • Unscrew the tie rod.
  3. step : Install the new tie rod (4:05)
    • Adjust the new locking nut to the same spot that the old one was (where you made your mark)
    • Screw in the new tie rod.
    • Install the cotter pin and bolt on the 17mm nut.
    • Install the cotterpin.
    • Use a grease gun to fill the joint.
  4. step : Replace the wheel (7:15)
    • Put the wheel on and hand tighten the lug nuts
    • Lower the car and torque the lug nuts to 80 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Puller

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-1999 Acura CL Steering Rack & Pinion Bellow Driver Side
  • 1995-1998 Acura TL Steering Rack & Pinion Bellow Driver Side
  • 1992-1994 Acura Vigor Steering Rack & Pinion Bellow Passenger Side
  • 1994-1997 Honda Accord Steering Rack & Pinion Bellow Driver Side
  • 1995-1997 Honda Odyssey Steering Rack & Pinion Bellow Driver Side
  • 1992-1996 Honda Prelude Steering Rack & Pinion Bellow Driver or Passenger Side Driver Side
  • 1997-2001 Honda Prelude Steering Rack & Pinion Bellow Driver Side
  • 1996-1997 Isuzu Oasis Steering Rack & Pinion Bellow Driver Side

This part replaces:

  • OE # 53534SL4J01, 53535SL5A01
  • Beck Arnley 103-2876
Part #: 1ASTE00573

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(08:20 min)