Specifications:

  • Brand New Rack & Pinion Bellow
  • Fits LH (Driver Side) 
  • Direct replacement
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:55)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:15)
    • Measure the distance from the end of the boot to the center of the top of the tie rod
    • Note that measurement
    • Apply penetrating oil to the tie rod lock nut
    • Hold the inner tie rod with a 13mm wrench
    • Loosen the locking nut with an adjustable wrench
    • Turn the wheel by hand or with the steering wheel for better access to the tie rod
    • Remove the cotter pin with needle nose pliers
    • If you cannot remove the cotter pin, sheer it off by removing the 19mm bolt
    • Remove the 19mm bolt
    • Loosen the tie rod from the spindle by striking the spindle with a hammer
    • Pull the outer tie rod out of the handle
    • Hold the inner tie rod with a 13mm wrench
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (3:52)
    • Apply anti-seize grease to the inner tie rod
    • Hold the inner tie rod with a 13mm wrench
    • Twist the outer tie rod on by hand
    • Measure the distance from the end of the boot to the center of the top of the tie rod
    • This should equal the measurement recorded in Step 2
    • Push the outer tie rod into the spindle
    • Start the tie rod nut by hand
    • Tighten the nut to 55 foot-pounds of torque
    • Line the tie rod hole up with one of the slots in the nut
    • Insert the cotter pin and bend it to lock it
    • Hold the inner tie rod with a 13mm wrench
    • Tighten the locking nut with an adjustable wrench
  4. step : Reattaching the Wheel (6:35)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 19mm Socket
  • 21mm Socket

  • Wrenches - Metric

  • 13mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003-2007 Infiniti G35 Steering Rack & Pinion Bellow Driver Side
  • 2000-2001 Infiniti I30 Steering Rack & Pinion Bellow Driver Side
  • 2002-2004 Infiniti I35 Steering Rack & Pinion Bellow Driver Side
  • 2006-2010 Infiniti M35 Steering Rack & Pinion Bellow Driver Side
  • 2006-2010 Infiniti M45 Steering Rack & Pinion Bellow Driver Side
  • 2002-2006 Infiniti Q45 Steering Rack & Pinion Bellow Driver Side
  • 2006 Nissan 350Z Steering Rack & Pinion Bellow Driver Side (Built After 2/06 Production Date)
  • 2007-2009 Nissan 350Z Steering Rack & Pinion Bellow Driver Side
  • 2002-2003 Nissan Altima Steering Rack & Pinion Bellow Driver Side
  • 2007-2012 Nissan Altima Steering Rack & Pinion Bellow Driver Side
  • 2000-2003 Nissan Maxima Steering Rack & Pinion Bellow Driver Side
  • 2009-2014 Nissan Maxima Steering Rack & Pinion Bellow Driver Side
  • 2005-2007 Nissan Murano Steering Rack & Pinion Bellow Driver Side

This part replaces:

  • Beck Arnley 103-3072
Part #: 1ASTB00036

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(07:13 min)