Replaces

Steering Kit - 1ASFK02786

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   6 Piece Set
  • Kit Includes:
      (2) Steering Rack & Pinion Bellows
      (2) Front Outer Tie Rods
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Tie Rod Kit
  • Comes as Set of 6
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:59)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (3:45)
    • Turn the wheel by hand to check for play in the tie rod
    • Check for a gap in movement between the tie rod and spindle
    • Listen for a clunking sound from the tie rod
    • Measure the distance from the steering rack bellow to the lock nut
    • Record this measurement
    • Alternatively, mark the inner tie rod threads against the lock nut with a marker
    • Straighten out the cotter pin with needle nose pliers
    • Pull the cotter pin out of the castle nut
    • Loosen the castle nut from the tie rod with a 17mm socket and ratchet
    • Apply penetrating oil to the lock nut
    • Loosen the lock nut with a 22mm wrench
    • Tap the tie rod loose from the spindle with a hammer
    • Remove the castle nut
    • Tap the tie rod out of the spindle
    • Hold the inner tie rod with a 14mm wrench if necessary
    • Twist the outer tie rod off the inner tie rod with a 19mm wrench
    • Twist off the lock nut by hand
  3. step : Installing the Outer Tie Rod (8:07)
    • If you marked the inner tie rod, spin the lock nut to match the paint line
    • If you took a measurement, spin the lock nut to the correct distance from the steering bellow
    • Spin the outer tie rod onto the inner tie rod until it reaches the lock nut
    • Push the tie rod stud into the wheel spindle
    • Torque the tie rod nut to 36 foot-pounds
    • Install the new cotter pin with the longer leg facing down
    • Bend the cotter pin under the nut with pliers
    • Turn the inner tie rod with a 14mm wrench if it needs to be adjusted
    • Hold the inner tie rod with a 14mm wrench
    • Tighten the lock nut with a 22mm wrench
  4. step : Reattaching the Wheel (11:36)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Measuring Tape
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Marker / Writing Utensil

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 19mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 22mm Wrench
  • 14mm Wrench
  • 19mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2000Lexus ES300 Lexus ES300 6 Piece Set Steering Kit
2001Lexus ES300 Lexus ES300 6 Piece Set Steering Kit (Built Before 7/01 Production Date)
1997-2004Toyota Avalon Toyota Avalon 6 Piece Set Steering Kit
1997-2000Toyota Camry Toyota Camry 6 Piece Set Steering Kit
2001Toyota Camry Toyota Camry 6 Piece Set Steering Kit (Built Before 7/01 Production Date)
1998-2003Toyota Sienna Toyota Sienna 6 Piece Set Steering Kit
1999-2003Toyota Solara Toyota Solara 6 Piece Set Steering Kit
Part #: 1ASFK02786


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:51 min)