Part Details

  • Quantity: 2 Piece Set
  • Kit Includes:
    (1) Pitman Arm
    (1) Idler Arm

Specifications:

  • Brand New Pitman & Idler Kit
  • Built to strict quality control standards
  • Correct for models with a distance of 2.48" between mounting holes
    • Not correct for models with a distance of 3.43" between mounting holes
  • Direct replacements
  • Fits both 2WD & 4WD Models

 

 

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Idler Arm (0:21)
    • Raise and support the vehicle
    • Remove the cotter pin from the idler arm castle nut with side cutters
    • Loosen the castle nut with a 21mm wrench or socket and breaker bar
    • Remove the castle nut
    • Attach an idler arm puller to the idler arm
    • Turn the idler arm puller bolt to separate the idler arm from the steering linkage
    • Remove the two 21mm bolts that hold the idler arm to the frame
    • Pull the idler arm off the frame
  2. step : Installing the Idler Arm (3:24)
    • Twist the castle nut off the new idler arm
    • Remove the plastic cover from the new idler arm ball joint
    • Start the grease fitting into the frame side of the idler arm by hand
    • Tighten the grease fitting with a 9/32" wrench
    • Start the grease fitting into the ball joint side of the idler arm by hand
    • Tighten the grease fitting with a 9/32" wrench
    • Line up the idler arm on the frame
    • Start the top 21mm bolt into the idler arm
    • Start the lower 21mm bolt into the idler arm
    • Tighten the two 21mm bolts preliminarily
    • Connect the steering linkage to the idler arm
    • Start the castle nut onto the idler arm stud
    • Tighten the castle nut to 70 foot-pounds of torque
    • Turn the castle nut to line up with the cotter pin hole
    • Insert the cotter pin through the cotter pin hole
    • Bend the cotter pin to secure it
    • Torque the two 21mm bolts that hold the idler arm to the frame to 140 foot-pounds
    • Add grease to each grease fitting with a grease gun until it starts to leak
    • Wipe off any remaining grease

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Side Cutters

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket

  • Specialty Tools

  • Grease Gun
  • Idler Arm Puller

  • Wrenches - Metric

  • 21mm wrench

  • Wrenches - SAE

  • 9/32 Inch Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Excellent value
Arts were shipped quickly and relaxed .ca Tory parts without a problem
October 19, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1997-2002Ford Expedition Ford Expedition with 2.48" Bolt Pattern Idler Arm Steering Kit 2 Piece Set
2004Ford F150 Heritage Truck Ford F150 Heritage Truck with 2.48" Bolt Pattern Idler Arm Steering Kit 2 Piece Set
1997-2003Ford F150 Truck Ford F150 Truck with 2.48" Bolt Pattern Idler Arm Steering Kit 2 Piece Set
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck with 2.48" Bolt Pattern Idler Arm Steering Kit 2 Piece Set
2002Lincoln Blackwood Lincoln Blackwood with 2.48" Bolt Pattern Idler Arm Steering Kit 2 Piece Set
1998-2002Lincoln Navigator Lincoln Navigator with 2.48" Bolt Pattern Idler Arm Steering Kit 2 Piece Set

This part replaces:

  • Moog K8739T
  • Moog K8700
  • OE # F75Z3350AB
  • OE # F85Z3350AA
  • OE # XL3Z3590AA
  • OE # F75Z3590AA
  • OE # F65Z3590AA
  • OE # 1L3Z3350AB
Part #: 1ASFK02304


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:18 min)