This replacement Idler and Pitman Arm set is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Idler Arm Specifications:

  • Bolts to RH (Passenger Side) Frame
  • Attaches to relay rod or drag link
  • Is arm only, does not include mounting bracket
  • Does NOT fit models with Rack & Pinion Steering
  • For Silverado/Sierra 1500 models: Fits Regular and Extended Cab models only
    • Does NOT fit Crew Cab models

Pitman Arm Specifications:

  • 4 Groove design
  • Connects at steering box and to relay arm

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Pitman Arm (0:29)
    • Loosen the three 21mm bolts holding the steering box to the frame
    • Remove the 21mm castle nut on the ball joint end of the pitman arm
    • Remove the pitman arm from the steering linkage with a two jaw puller or a pickle fork
    • Pull the pitman arm out of the steering linkage
    • Hold the steering box in place
    • Remove the 34mm nut on the pitman arm
    • Insert the two jaw puller to the pitman arm
    • Pry the pitman arm off of the steering box
    • Remove the pitman arm from the truck
  2. step : Installing the Pitman Arm (6:00)
    • Grease the pitman arm with a grease gun
    • Insert the pitman arm up into place
    • Attach the washer and 34mm bolt
    • Tighten the 34mm bolt
    • Press the pitman arm into the steering linkage
    • Hand-tighten the castle nut
    • Hand-tighten the three 21mm bolts into the steering box
    • Tighten the steering box bolts
    • Tighten the 19mm castle nut
    • Insert the cotter pin into the castle nut
    • Bend the cotter pin

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • Complete Metric Socket Set

  • Specialty Tools

  • 2 Jaw Gear Puller
  • Grease Gun
  • Pickle Fork
  • Acetylene torch

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Cadillac Escalade Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 2003-2006 Cadillac Escalade ESV Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 2002-2006 Cadillac Escalade EXT Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 2002-2006 Chevy Avalanche 1500 Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 1999-2003 Chevy Silverado 1500 4 Wheel Drive Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 2004-2006 Chevy Silverado 1500 4 Wheel Drive Steering Kit for Models with 4 Groove Pitman Arm (excluding Crew Cab) for Models without Rack & Pinion Steering 2 Piece Set
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive Steering Kit for Models with 4 Groove Pitman Arm (excluding Crew Cab) for Models without Rack & Pinion Steering 2 Piece Set
  • 2000-2006 Chevy Suburban 1500 Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 2000 Chevy Tahoe Steering Kit for Models with 4 Groove Pitman Arm (excluding Z71 Models) 2 Piece Set
  • 2001-2006 Chevy Tahoe Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 1999-2003 GMC Sierra 1500 4 Wheel Drive Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 2004-2006 GMC Sierra 1500 4 Wheel Drive Steering Kit for Models with 4 Groove Pitman Arm (excluding Crew Cab) for Models without Rack & Pinion Steering 2 Piece Set
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive Steering Kit for Models with 4 Groove Pitman Arm (excluding Crew Cab) for Models without Rack & Pinion Steering 2 Piece Set
  • 2000 GMC Yukon Steering Kit for Models with 4 Groove Pitman Arm (excluding Denali Models) 2 Piece Set
  • 2001-2006 GMC Yukon Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set
  • 2000-2006 GMC Yukon XL 1500 Steering Kit for Models with 4 Groove Pitman Arm 2 Piece Set

This part replaces:

  • OE # 19149615
  • OE # 12471379
  • Moog K6534
  • Moog K6536
Part #: 1ASFK02075

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(09:03 min)