Specifications:

  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 4 Piece Set
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Hub Assemblies

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Remove the wheel and tire (1:30)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:00)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove brake disk (2:44)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (2:56)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (8:30)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Review
I love getting my parts from you guys to be honest. I used to shop around ebay rock auto places like that i even used auto zone but when I found a1 auto that change. Not only do your parts look the same as the picture they also come in perfect condition not once have I received a bad or fair part not to mention the prices.i don't usually write Reviews sorry it's so long but the best part about a1 auto is the YouTube videos you provide when buying most parts I mean come on Cheap prices Perfect condition parts and You show us how to install the part I love you guys hands down one of the best out there . P.s. the guy with the glasses in the video deserves an award man thank you sir
May 18, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2004Chevy Impala Chevy Impala RPO Code FE4 (Special Ride & Handling Suspension) with ABS Brakes Steering Kit 4 Piece Set
2005Chevy Impala Chevy Impala RPO Code FE4 (Special Ride & Handling Suspension) RPO Code JB9 (Light Duty Brakes) RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) with ABS Brakes Steering Kit 4 Piece Set
2005Chevy Impala Chevy Impala RPO Code FE4 (Special Ride & Handling Suspension) RPO Code JA9 (Heavy Duty Brakes) with ABS Brakes Steering Kit 4 Piece Set
2006-2008Chevy Impala Chevy Impala RPO Code FE4 (Special Ride & Handling Suspension) with ABS Brakes Steering Kit 4 Piece Set
2009-2011Chevy Impala Chevy Impala RPO Code FE4 (Special Ride & Handling Suspension) Steering Kit 4 Piece Set
1997-2000Chevy Venture Chevy Venture with ABS Brakes Steering Kit 4 Piece Set
2001-2005Chevy Venture Chevy Venture Front Wheel Drive with ABS Brakes Steering Kit 4 Piece Set
1997-2000Oldsmobile Silhouette Olds Silhouette with ABS Brakes Steering Kit 4 Piece Set
2001-2004Oldsmobile Silhouette Olds Silhouette Front Wheel Drive with ABS Brakes Steering Kit 4 Piece Set
1997-2003Pontiac Grand Prix Pontiac Grand Prix with ABS Brakes Steering Kit 4 Piece Set
1999-2000Pontiac Montana Pontiac Montana with ABS Brakes Steering Kit 4 Piece Set
2001-2005Pontiac Montana Pontiac Montana Front Wheel Drive with ABS Brakes Steering Kit 4 Piece Set
2002-2005Pontiac Montana Pontiac Montana All Wheel Drive with ABS Brakes Steering Kit 4 Piece Set
1997-1998Pontiac Trans Sport Pontiac Trans Sport with ABS Brakes Steering Kit 4 Piece Set

This part replaces:

  • Moog ES3453
  • Dorman 951-016
  • Hollander 538-01680B
  • OE # 12429204, 7470017
  • Reference Number 513121
  • OE # 7470105
  • OE # 7470143
  • Reference Number 513179
  • Reference Number 513187
  • Reference Number 513199
Part #: 1AHTF00005


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:37 min)