Replaces

Steering Column Shift Clamp and Bushing Dorman 905-110 - 1ATSR00007

This steering column clamp and bushing are just what you need to get your vehicle in good working order again!

Specifications:

  • Steering Column Shift Clamp and Bushing
  • Replaces dealer part numbers: F2DC-7E400-A, F2DZ-7E400-A, F3TZ-7L278-A, F2DC7E400A, F2DZ7E400A, F3TZ7L278A
  • Direct replacements
  • Built to strict quality control standards

This steering column clamp and bushing make great replacements and have good cost savings over dealer units.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Battery (1:19)
    • Remove the negative battery terminal with an 8mm socket and ratchet
  2. step : Removing the Steering Column Cover (1:42)
    • Remove the Phillips head screws from the lower steering column cover
    • Tilt the column down
    • Work off the top half of the cover
    • Unscrew the tilt column level
    • Remove the lower half of the cover
  3. step : Removing the Knee Panel and Plate (2:23)
    • Remove the four 7mm bolts on the bottom of the knee panel
    • Pull the knee panel off
    • Remove the five 8mm screws from the metal plate
  4. step : Removing the Gear Selector (3:16)
    • Remove the two 13mm nuts securing the U-brace at the bottom of the column
    • Hold the column up
    • Remove the two 13mm nut at the base of the steering column
    • Carefully lower the column
  5. step : Removing the Shift Tube Clamp and Bushing (4:15)
    • Remove the two T30 Torx screws from the clamp
    • Remove the shift selector tube
    • Pry off the bushing with a flat blade screwdriver
  6. step : Installing the Tube Clamp and Bushing (5:58)
    • Press the bushing into place
    • Tighten the two T30 screws to the clamp
  7. step : Reinstalling the Gear Selector (6:32)
    • Lift the column onto its studs
    • Start the bolts in the back
    • Insert the U-brace into place
    • Tighten the 13mm nuts to the column
    • Tighten the 13mm nuts to the U-brace
  8. step : Reinstalling the Steering Column Cover (7:20)
    • Insert the upper steering column cover into place
    • Insert the lower steering column cover so it snaps with the upper cover
    • Tighten the Phillips head screws to the column cover
    • Twist the tilt column lever into place
  9. step : Reinstalling the Knee Panel (7:55)
    • Insert the metal plate into place
    • Tighten the five 8mm screws to the plate
    • Press the knee panel into place
    • Reinstall the hood release
    • Tighten the four 7mm bolts to the bottom of the panel
  10. step : Reconnecting the Battery (8:52)
    • Reconnect the negative battery terminal
    • Tighten the terminal with an 8mm socket and ratchet

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 8mm Socket
  • 13mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
ASAP repair
Was easy to find and order.The process went very well and I received the correct part as purchased and time promised. Exact fit and back in action.
October 8, 2018
Purchased
4 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
is this made of steel?thanks
tony b on Aug 21, 2017
BEST ANSWER: Yep, and a good quality as well
Do these bushings and clamps come in pairs?
Chico on Aug 25, 2017
BEST ANSWER: This does not come in a pair, it comes with one clamp and one bushing.

Vehicle Fit

Year Make Model Description
1992-1997Ford Aerostar Ford Aerostar Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1992-1996Ford Bronco Ford Bronco Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1992-2006Ford Crown Victoria Ford Crown Victoria Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1992-2014Ford E150 Van Ford E150 Van Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1992-2014Ford E250 Van Ford E250 Van Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1992-2017Ford E350 Van Ford E350 Van Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2000-2017Ford E450 Van Ford E450 Van Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2002-2003Ford E550 Van Ford E550 Van Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2000-2005Ford Excursion Ford Excursion Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1997-2002Ford Expedition Ford Expedition Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1997-2003Ford Explorer Ford Explorer Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2001-2005Ford Explorer Sport Trac Ford Explorer Sport Trac Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1992-2003Ford F150 Truck Ford F150 Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1999-2007Ford F250 Super Duty Truck Ford F250 Super Duty Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1992-1997Ford F250 Truck Ford F250 Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1999-2007Ford F350 Super Duty Truck Ford F350 Super Duty Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1992-1997Ford F350 Truck Ford F350 Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2000-2007Ford F450 Truck Ford F450 Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2000-2007Ford F550 Truck Ford F550 Truck Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2004-2007Ford Freestar Ford Freestar Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1995-2011Ford Ranger Ford Ranger Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1990-2007Ford Taurus Ford Taurus Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1995-2003Ford Windstar Ford Windstar Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2002Lincoln Blackwood Lincoln Blackwood Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1990-2002Lincoln Continental Lincoln Continental Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1998-2002Lincoln Navigator Lincoln Navigator Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1990-2004Lincoln Town Car Lincoln Town Car Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1990-2006Mercury Grand Marquis Mercury Grand Marquis Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
2004-2007Mercury Monterey Mercury Monterey Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1997-2001Mercury Mountaineer Mercury Mountaineer Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1990-2005Mercury Sable Mercury Sable Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110
1993-1995Mercury Villager Mercury Villager Steering Column Shift Clamp and Bushing for Models with Automatic Transmission Dorman 905-110

This part replaces:

  • Dorman 905-110
  • OE # F3TZ 7L278A
Part #: 1ATSR00007


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Dorman
Brand #: 905-110

How-to Video:

(09:19 min)