Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:47)
    • Pry off the wheel cover by hand
    • Loosen the lug nut covers with a 21mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:19)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Loosen the tie rod with an adjustable wrench
    • Straighten out the castle nut pin with pliers
    • Remove the pin
    • Remove the 21mm castle nut from the ball joint
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Pull the tie rod out of the wheel knuckle
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • Note that measurement
    • Twist off the outer tie rod
  3. step : Installing the Outer Tie Rod (2:39)
    • Twist the outer tie rod onto the inner tie rod
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • This should be the same as the measurement from Step 2
    • Push the ball joint into the steering knuckle
    • Fasten the castle nut onto the ball joint
    • Push the pin through the castle nut
    • Bend the pin into place with pliers
    • Tighten the tie rod with an adjustable wrench
  4. step : Reattaching the Wheel (4:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 21mm socket
    • Push on the wheel cover

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 7mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Ok parts
I finally got my steering rebuilt. The parts are what I expected. Not top of the line but ok. I am disappointed there are no grease zerks in the lower ball joints and some of the other parts. Still a great deal for the cost!
February 22, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2004 Chevy Silverado 1500 Crew Cab 4 Wheel Drive 8 Lug Wheels with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2003 Chevy Silverado 1500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2005-2006 Chevy Silverado 1500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2007 Chevy Silverado 1500 HD Classic 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2004 Chevy Silverado 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2006 Chevy Silverado 2500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2007 Chevy Silverado 2500 HD Classic 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2006 Chevy Silverado 3500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2010 Chevy Suburban 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2004 GMC Sierra 1500 Crew Cab 4 Wheel Drive 8 Lug Wheels with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2003 GMC Sierra 1500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2005-2006 GMC Sierra 1500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2007 GMC Sierra 1500 HD Classic 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2004 GMC Sierra 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2006 GMC Sierra 2500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2007 GMC Sierra 2500 HD Classic 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2006 GMC Sierra 3500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2001-2010 GMC Yukon XL 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set
  • 2003-2007 Hummer H2 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 17 Piece Set

This part replaces:

  • A1 Cardone 66-1325
  • Moog ES3609
  • Moog K620053
  • Moog K6535
  • Moog K80631
  • Moog K6693
  • Moog K6723
  • Moog K6654
  • Moog ES3488
  • Reference Number 379 515058
  • Reference Number K620054
  • Dorman 520-150
  • Dorman 951-067
  • Hollander 538-01482, 538-01764
  • Hollander 511-01044, 511-01045
  • Hollander 447-02434
  • OE # 15225770
  • OE # 15891516
  • OE # 12479051
  • OE # 15891515
  • OE # 15295861, 26059210
  • OE # 12471378, 19149615
  • OE # 15224737, 15864153
  • OE # 15868120
Part #: 1ASFK05553


How-to Video:

(04:55 min)