Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Lower Control Arms
  • Quantity: 8 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (1:17)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Links (2:52)
    • Grab the backside of the joint with locking pliers
    • Remove the 14mm nut from the sway bar link
    • Repeat the process for the lower end
  3. step : Installing the New Sway Bar Links (5:34)
    • Insert the lower end of the sway bar link into place
    • Start the 14mm nuts
    • Torque the sway bar link nuts to 29 foot-pounds
  4. step : Reattaching the Wheel (6:30)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2000 Lexus ES300 8 Piece Set Steering & Suspension Kit
  • 2001 Lexus ES300 (Built Before 7/01 Production Date) 8 Piece Set Steering & Suspension Kit
  • 1997 Toyota Avalon 8 Piece Set Steering & Suspension Kit
  • 1997-2000 Toyota Camry 8 Piece Set Steering & Suspension Kit
  • 2001 Toyota Camry L4 2.2L (Built Before 7/01 Production Date) 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K9499
  • Moog K90311
  • Moog K90312
  • Moog ES3306
  • Moog K620051
  • Moog K620052
  • Dorman 520-405
  • Dorman 520-406
  • Hollander 512-58289L; 512-58385AL
  • Hollander 512-58289R; 512-58385AR
  • OE # 48069-33020; 48069-33031
  • OE # 4333039435
  • OE # 48068-33020; 48068-33031
  • OE # 4504629255
  • OE # 4881006030, 4881033010
  • OE # 4882006030
Part #: 1ASFK05449

How-to Video:

(07:21 min)