Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Upper Control Arms with Ball Joints
  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Inner Tie Rod (0:53)
    • Raise and secure the vehicle
    • Measure the length of the inner tie rod to the outer tie rod with a tape measure
    • Measure this length at extension and in compression
    • Note those measurements
    • Clean grease from the inner tie rod fitting
    • Loosen the inner tie rod from the steering rack with an adjustable wrench
    • Hold the outer tie rod in place with a wrench
    • Loosen the inner tie rod from the outer tie rod with the adjustable wrench
    • Remove the tie rod at the steering rack
    • Turn the inner tie rod counterclockwise to remove it from the outer tie rod
  2. step : Installing the New Inner Tie Rod (3:38)
    • Apply thread lock to the threads on the steering rack side of the inner tie rod
    • Use a floor jack to keep the stabilizer link above the working area
    • Thread the inner tie rod on to the steering rack
    • Tighten the inner tie rod to between 70 – 80 foot-pounds of torque
    • Twist the nut onto the outer end of the inner tie rod by hand
    • Turn the tire in to push the inner tie rod into the outer tie rod
  3. step : Adjusting the Inner Tie Rod (6:19)
    • Measure the length of the inner tie rod to the outer tie rod with a tape measure
    • Turn the inner tie rod with the adjustable wrench until its length is the noted length from Step 1
  4. step : Greasing the Fittings (7:33)
    • Use a grease gun to add grease to the inner tie rod fitting
    • Add grease until the tie rod boot starts to change shape
    • Add grease to other fittings as necessary

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Liquid Thread Locker
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Torque Wrench

  • Specialty Tools

  • Grease Gun

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 8 Piece Set Steering & Suspension Kit
  • 2001-2003 Chevy Silverado 1500 HD 8 Piece Set Steering & Suspension Kit
  • 2005-2006 Chevy Silverado 1500 HD 8 Piece Set Steering & Suspension Kit
  • 2007 Chevy Silverado 1500 HD Classic 8 Piece Set Steering & Suspension Kit
  • 1999-2004 Chevy Silverado 2500 8 Piece Set Steering & Suspension Kit
  • 2001-2010 Chevy Silverado 2500 HD 8 Piece Set Steering & Suspension Kit
  • 2007 Chevy Silverado 2500 HD Classic 8 Piece Set Steering & Suspension Kit
  • 2001-2010 Chevy Silverado 3500 8 Piece Set Steering & Suspension Kit
  • 2007 Chevy Silverado 3500 Classic 8 Piece Set Steering & Suspension Kit
  • 2001-2010 Chevy Suburban 2500 8 Piece Set Steering & Suspension Kit
  • 2001-2003 GMC Sierra 1500 HD 8 Piece Set Steering & Suspension Kit
  • 2005-2006 GMC Sierra 1500 HD 8 Piece Set Steering & Suspension Kit
  • 2007 GMC Sierra 1500 HD Classic 8 Piece Set Steering & Suspension Kit
  • 1999-2004 GMC Sierra 2500 8 Piece Set Steering & Suspension Kit
  • 2001-2010 GMC Sierra 2500 HD 8 Piece Set Steering & Suspension Kit
  • 2007 GMC Sierra 2500 HD Classic 8 Piece Set Steering & Suspension Kit
  • 2001-2010 GMC Sierra 3500 8 Piece Set Steering & Suspension Kit
  • 2007 GMC Sierra 3500 Classic 8 Piece Set Steering & Suspension Kit
  • 2001-2010 GMC Yukon XL 2500 8 Piece Set Steering & Suspension Kit
  • 2003-2009 Hummer H2 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Hollander 511-01044
  • Hollander 511-01045
  • OE # 15224737
  • OE # 15295861
  • OE # 15864153
  • OE # 15891515
  • OE # 26059210
  • Dorman 520-150
  • Moog ES3488
  • Moog ES3609
  • Moog K620053
  • Moog K6693
Part #: 1ASFK05371

How-to Video:

(08:32 min)