Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (1) Idler Arm Bracket
  • Kit Includes: (2) Front Upper Control Arms with Ball Joints
  • Quantity: 15 Piece Set
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Inner Tie Rods
  • Kit Includes: (2) Tie Rod Adjusting Sleeves

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Diagnosis (1:15)
    • To check to see if you have a bad pitman arm, jack up your car and secure it.
    • Move your wheel and if there is play in your pitman arm and joint.
  2. step : Remove the skid plate (1:55)
    • Unbolt the four 15 mm bolts.
    • Remove the kid plate and set aside.
  3. step : Prepare the steering box to access the pitman arm (2:10)
    • Unclip and move aside the plastic shield.
    • Spray the two fittings and the bolt with penetrating oil.
    • Loosen the power steering coupling bolt.
    • Use a fitting wrench to remove the two fittings and an 11 mm socket and ratchet and extension to remove the bolt.
    • Have a helper hold the steering wheel for you while you do this to make it easier.
    • Use a pry bar to move the steering shaft from the steering box.
  4. step : Remove the steering box and pitman arm (4:35)
    • Use a 21 mm bolt to remove the bolt mounting the pitman arm.
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three bolts securing the steering box and remove the steering box completely to remove the pitman arm.
    • Put the steering box and pit man arm in an oil pan.
    • Use an impact wrench or a large breaker bar as well as a pitman arm puller to remove the pitman arm from the steering arm.
  5. step : For reinstallation please see part 2 (8:10)

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Assistant
  • Hammer
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 34mm Socket
  • 15mm Socket
  • 21mm Socket
  • 11mm Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Got the kit
Got the kit and it was all there looks like it should be easy to put together.
May 5, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1994 Chevy Blazer Full Size 4 Wheel Drive 15 Piece Set Steering & Suspension Kit
  • 1993-1995 Chevy K1500 Truck 15 Piece Set Steering & Suspension Kit
  • 1993-1995 Chevy K2500 Truck 15 Piece Set Steering & Suspension Kit for Models with 6 Lug Wheels
  • 1993-1999 Chevy Suburban K1500 15 Piece Set Steering & Suspension Kit
  • 1995 Chevy Tahoe 4 Wheel Drive 15 Piece Set Steering & Suspension Kit
  • 1993-1995 GMC K1500 Truck 15 Piece Set Steering & Suspension Kit
  • 1993-1995 GMC K2500 Truck 15 Piece Set Steering & Suspension Kit for Models with 6 Lug Wheels
  • 1993-1999 GMC Suburban K1500 15 Piece Set Steering & Suspension Kit
  • 1992-1995 GMC Yukon 4 Wheel Drive 15 Piece Set Steering & Suspension Kit

This part replaces:

  • Hollander 511-00962L
  • Hollander 511-00962R
  • OE # 10385580
  • OE # 12388431
  • OE # 12388432
  • OE # 12542993
  • OE # 12546193
  • OE # 15070821
  • OE # 15167767
  • OE # 15835052
  • OE # 15840266
  • OE # 26048561
  • OE # 26051896
  • OE # 26059031
  • OE # 7839709
  • OE # 8260485610
  • Dorman 521-913
  • Dorman 521-914
  • Moog ES2004S
  • Moog ES2836RL
  • Moog ES2838RL
  • Moog K620719
  • Moog K620720
  • Moog K6291
  • Moog K6335
  • Moog K6447
  • Moog K6532
  • Moog K80631
Part #: 1ASFK05272

How-to Video:

(08:32 min)