Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 11 Piece Set
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (1) Idler Arm Bracket
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Inner Tie Rods

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:47)
    • Pry off the wheel cover by hand
    • Loosen the lug nut covers with a 21mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:19)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Loosen the tie rod with an adjustable wrench
    • Straighten out the castle nut pin with pliers
    • Remove the pin
    • Remove the 21mm castle nut from the ball joint
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Pull the tie rod out of the wheel knuckle
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • Note that measurement
    • Twist off the outer tie rod
  3. step : Installing the Outer Tie Rod (2:39)
    • Twist the outer tie rod onto the inner tie rod
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • This should be the same as the measurement from Step 2
    • Push the ball joint into the steering knuckle
    • Fasten the castle nut onto the ball joint
    • Push the pin through the castle nut
    • Bend the pin into place with pliers
    • Tighten the tie rod with an adjustable wrench
  4. step : Reattaching the Wheel (4:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 21mm socket
    • Push on the wheel cover

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 7mm Socket

3.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
1
Good refund process
We received an empty box. When I called to see if they could send me a new order they told me that the kit I ordered was out of stock but they could piece mill a kit together. They could fill the kit with an exception of two pieces and it was going to cost me more then the original price by about $60. On a better note the refund process was quick.
March 18, 2018
It was everything it advertised as.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
May 3, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2005Chevy Express 2500 Van Chevy Express 2500 Van 8600LB GVW 11 Piece Set Steering & Suspension Kit
2006-2014Chevy Express 2500 Van Chevy Express 2500 Van 11 Piece Set Steering & Suspension Kit
2003-2014Chevy Express 3500 Van Chevy Express 3500 Van 11 Piece Set Steering & Suspension Kit
2003-2005GMC Savana 2500 Van GMC Savana 2500 Van 8600LB GVW 11 Piece Set Steering & Suspension Kit
2006-2014GMC Savana 2500 Van GMC Savana 2500 Van 11 Piece Set Steering & Suspension Kit
2003-2014GMC Savana 3500 Van GMC Savana 3500 Van 11 Piece Set Steering & Suspension Kit
Part #: 1ASFK05233


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:55 min)