• Brand New Steering & Suspension Kit
  • Comes as a 14 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the pitman arm from the steering box (0:25)
    • Use a pitman arm puller to remove the pitman arm
  2. step : install the new pitman arm (1:00)
    • Make sure the new pitman arm goes on the same way the old one was on there.
    • Put the nut onto the pitman arm and tighten it, to press the arm on and take it off.
    • Put the lock washer on and then the nut again.
  3. step : install the steering box (2:00)
    • Mount the steering box into place
    • Start bolting the steering box in.
    • Make sure you aren’t pinching any hoses with the steering box.
    • Hook the pitman arm into the center link and thread on the bolt.
    • Connect the linkage to the steering box and bolt in the link bolt, which you want to torque to 35-40 ft lbs.
    • Connect and tighten up the power steering hoses.
    • Torque the steering box mounting bolts to 120 ft lbs.
    • Torque the nut connecting the pitman arm to the center link to 80 ft lbs.
    • Top off your power steering fluid.
    • Turn the car on, turn the wheel back and forth a few times, and double check your power steering fluid levels.

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 11mm Socket
  • 21mm Socket
  • 34mm Socket
  • 15mm Socket

  • Specialty Tools

  • Tie Rod Fork
  • Pitman Arm Puller

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Great quality
The pets arrived very hastily and were of good quality. The box was a little banged up when it got here but that’s shipping. Parts all fit and were easy to adjust on the alignment. Definitely a good product for old suspension parts that are worn
March 22, 2018
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1988-1992 Chevy C1500 Truck 14 Piece Set Steering & Suspension Kit
  • 1988-1992 Chevy C2500 Truck 7200LB GVW for Models with 6 Lug Wheels 14 Piece Set Steering & Suspension Kit
  • 1992 Chevy Suburban C1500 14 Piece Set Steering & Suspension Kit
  • 1988-1992 GMC C1500 Truck 14 Piece Set Steering & Suspension Kit
  • 1988-1992 GMC C2500 Truck 7200LB GVW for Models with 6 Lug Wheels 14 Piece Set Steering & Suspension Kit
  • 1992 GMC Suburban C1500 14 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog K6293
  • Moog K6390
  • Moog ES2004S
  • Moog K6292
  • Moog K6335
  • Moog ES2836RL
  • Moog ES2837RL
  • Moog K5252
  • OE # 26048561, 7839709, 8260485610
  • OE # 26051896
  • OE # 26016461
Part #: 1ASFK04976

How-to Video:

(06:40 min)