Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) and RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

 

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:54)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:16)
    • Turn the wheel by hand
    • Hold the upper stabilizer link stud with an 18mm wrench
    • Remove the upper nut from the stabilizer link with an 18mm socket
    • Hold the lower stabilizer link stud with an 18mm wrench
    • Remove the lower nut from the stabilizer link with an 18mm wrench
    • Pull off the stabilizer link
  3. step : Reinstalling the Stabilizer Link (2:23)
    • Push the stabilizer link into place
    • Hold the lower stabilizer link stud with an 18mm wrench
    • Fasten the lower nut onto the stabilizer link with an 18mm wrench
    • Hold the upper stabilizer link stud with an 18mm wrench
    • Fasten the upper nut onto the stabilizer link with an 18mm socket
  4. step : Reattaching the Wheel (3:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
2005 Malibu Maxx
Tie rods are same style, sway bar is not has heavy gauge as the originals. Overall Good Product. I would have given a 5 star but the product has no grease inserts. For the price I can not complain to much.
July 22, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:31 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • Moog K80252
  • Moog ES800086
  • OE # 20784686
  • OE # 22687089, 15944090

Vehicle Fit

  • 2004-2012 Chevy Malibu 4 Piece Set Steering & Suspension Kit
  • 2004-2007 Chevy Malibu Maxx 4 Piece Set Steering & Suspension Kit
  • 2005-2010 Pontiac G6 4 Piece Set Steering & Suspension Kit
  • 2007-2009 Saturn Aura 4 Piece Set Steering & Suspension Kit
Part #: 1ASFK04965

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More