Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:03)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:24)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Measure the distance from the end of the boot to the center of the tie rod end
    • Note that measurement
    • Loosen the tie rod lock nut with a 15/16" wrench
    • Loosen the 21mm nut from the tie rod
    • Strike the steering knuckle with a hammer to loosen it
    • Lift the tie rod end out of the steering knuckle
    • Twist off the outer tie rod by hand
  3. step : Installing the Outer Tie Rod (2:18)
    • Twist on the outer tie rod
    • Push the tie rod into the steering knuckle
    • Thread the 22mm castle nut onto the tie rod by hand
    • Measure the distance from the end of the boot to the center of the tie rod end
    • This should be the same as the measurement from Step 2
    • Twist the grease fitting into the tie rod
    • Tighten the castle nut to 50-55 foot-pounds of torque
    • Put the cotter pin into the castle nut
    • Twist on the cotter pin with pliers
    • Hold the inner tie rod with a 16mm wrench
    • Tighten the locking nut with a 15/16" wrench
    • Add grease to the tie rod with a grease gun
  4. step : Reattaching the Wheel (4:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100-110 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 16mm Wrench

  • Wrenches - SAE

  • 15/16 Inch Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Quality parts, great ride
I didn’t want to spend a huge amount of money on my front end, but at the same time I didn’t want to go super cheap. I found this kit and figured why not give it a try. Installation was a breeze. The struts that comes with this kit fit perfectly as well. After install I test drove my truck and everything was up to par. Thank you A1 Auto, great products!
November 7, 2017
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
Or these some good parts? What name brand or the parts
Boram on Jul 31, 2017
BEST ANSWER: Not sure in the band, but the quality was fine. They've been on my truck for a few months now and no problems. I was a little skeptical myself, but I was not disappointed.
What brand is it?
Diego L on Jun 5, 2017
BEST ANSWER: This is our 1A Auto house brand kit. It does include a lifetime warranty against manufacturer defects. Thank you for asking. Have a great day!
Does it work for a 4x4?
Sergio C on May 13, 2017
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

How-to Video:

(05:10 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 16mm Wrench

  • Wrenches - SAE

  • 15/16 Inch Wrench



This part replaces:

  • Moog K700432
  • Moog K6541
  • Moog ES800223
  • Moog K80669
  • Moog K80670
  • Moog EV800084
  • Dorman 521-024
  • Dorman 521-023
  • Hollander 511-00358R
  • Hollander 511-00359L
  • OE # 12475478
  • OE # 25812726
  • OE # 25918049
  • OE # 25812725
  • OE # 15254060
  • OE # 15254061
  • Monroe 139105

Vehicle Fit

  • 2007-2013 Cadillac Escalade 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
  • 2007-2013 Cadillac Escalade ESV 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
  • 2007-2013 Cadillac Escalade EXT 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
  • 2007-2010 Chevy Avalanche 1500 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
  • 2007 Chevy Silverado 1500 New Body Style Steering & Suspension Kit 12 Piece Set Stamped Steel Lower Control Arms for Models with without Electronic Suspension
  • 2008-2013 Chevy Silverado 1500 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
  • 2007-2013 Chevy Suburban 1500 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
  • 2007-2013 Chevy Tahoe 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
  • 2007 GMC Sierra 1500 New Body Style Steering & Suspension Kit 12 Piece Set Stamped Steel Lower Control Arms for Models with without Electronic Suspension
  • 2008-2013 GMC Sierra 1500 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
  • 2007-2013 GMC Yukon 12 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms without Electronic Suspension
Part #: 1ASFK04908

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More