Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Lower Control Arms
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:23)
    • Loosen the lug nut covers with the supplied lug nut tool
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Ball Joint (2:34)
    • Remove the three 16mm bolts from the ball joint
    • Loosen the upper nut with an 18mm box wrench
    • If the stud keeps spinning, hold the base with locking pliers
    • Remove the nut
    • Lower the control arm and remove the ball joint
  3. step : Installing the Ball Joint (5:35)
    • Insert the ball joint into place
    • Tighten the 18mm nut by hand
    • Tighten the 18mm nut with a box wrench
    • Tighten the three 16mm bolts
    • Torque the 16mm nuts to 16 newton meters
  4. step : Reattaching the Wheel (6:58)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 Newton meters in a crossing or star pattern
    • Tighten the lug nut covers

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 16mm Socket
  • 17mm Socket
  • 18mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2013 Audi A3 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2006-2013 Audi A3 Quattro 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2014 VW Eos 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2014 VW GTI 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2010-2014 VW Golf 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2006 VW Jetta (8th Vin Digit K) (7th Vin Digit 1) 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2010 VW Jetta 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2011-2014 VW Jetta 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms Wagon
  • 2008 VW R32 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2006-2009 VW Rabbit 8 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms

This part replaces:

  • Moog K80662
  • Moog K80663
  • Moog ES80666
  • Moog ES80667
  • Beck Arnley 101-5971
  • Beck Arnley 101-5972
  • Beck Arnley 101-5850
  • Beck Arnley 101-5851
  • Dorman 520-991
  • Dorman 520-992
  • Hollander 512-59015AR
  • Hollander 512-59016AL
  • OE # 1K0411315B, D, J, K, R
  • OE # 1K0 407 152 AA, 1K0 407 152 P
  • OE # 1K0 407 151 AA, 1K0 407 151 P
  • OE # 1K0407365C
  • OE # 1K0407366C
  • OE # 1K0423811E
  • OE # 1K0423812E
  • Moog K80478
Part #: 1ASFK04865

How-to Video:

(08:44 min)