Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 15 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
1
0
0
0
Great buy
This fits perfectly in my truck. I was sceptical about the quality until the parts arrived. They seem good. They were a Great price. I recommend these parts.
July 25, 2017
Purchased
7 months ago
Direct replacement
This part is well made and a direct replacement part. It has a grease fitting and castle nut with cotter pin
February 26, 2017
Purchased
1 year ago
Chevy Silverado 15 piece front end kit
A lot of parts for the money! upper control arms fit nice idler and pitman arms visually didn't seem as thick as the originals. Inner and outer tie-rod ends fit great except inner tie-rods don't want to except grease like they should but there still breaking in and I didn't use the lower ball joints because they didn't have grease zerks ( my choice)
Time will tell on overall quality but I would recommend! And hey I got free shipping!!! Go 1-A Auto!!!
March 28, 2017
Purchased
1 year ago
Thanks
Work great for perfect fit thanks A-1 Auto I would definitely get some more parts for from this website
October 29, 2017
Purchased
4 months ago
15 pc suspension and steering kit Chevy 2500hd 4x4
Quick shipping and what an amazing price! All of the parts fit great with no machining or fab work! I was actually surprised. I would definitely buy from A1 Auto again!! Thanks again
February 17, 2018
Purchased
3 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 1 answer
What brand are the components?
Owen K on Feb 24, 2018
BEST ANSWER: They are made in Taiwan, was concerned but all parts are going on one year with no issues.
Are there grease fittings in upper and lower ball joints?
Tony M on Feb 10, 2018

How-to Video:

(10:03 min)

Tools List:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench



This part replaces:

  • Moog ES3609
  • Moog K620053
  • Moog K6535
  • Moog K80631
  • Moog K6693
  • Moog K6723
  • Moog K6654
  • Moog ES3488
  • Dorman 520-150
  • Dorman 4110406
  • Hollander 538-01482
  • Hollander 511-01044
  • OE # 15225770
  • OE # 15891516
  • OE # 12479051
  • OE # 15891515
  • OE # 15295861, 26059210
  • OE # 12471378, 19149615
  • OE # 15224737, 15864153
  • Hollander 538-01764
  • Hollander 511-01045
  • Dorman 951-067
  • Hollander 538-01482, 538-01764
  • Hollander 511-01044, 511-01045
  • Reference Number 515058

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2004 Chevy Silverado 1500 Crew Cab 4 Wheel Drive 8 Lug Wheels with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2003 Chevy Silverado 1500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2005-2006 Chevy Silverado 1500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2007 Chevy Silverado 1500 HD Classic 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2004 Chevy Silverado 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2010 Chevy Silverado 2500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2007 Chevy Silverado 2500 HD Classic 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2010 Chevy Silverado 3500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2010 Chevy Suburban 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2004 GMC Sierra 1500 Crew Cab 4 Wheel Drive 8 Lug Wheels with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2003 GMC Sierra 1500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2005-2006 GMC Sierra 1500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2007 GMC Sierra 1500 HD Classic 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2004 GMC Sierra 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2010 GMC Sierra 2500 HD 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2007 GMC Sierra 2500 HD Classic 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2010 GMC Sierra 3500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2001-2010 GMC Yukon XL 2500 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
  • 2003-2007 Hummer H2 4 Wheel Drive with 3 Groove Pitman Arm Steering & Suspension Kit 15 Piece Set
Part #: 1ASFK04683

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More