Specifications:

  • Brand New Steering and Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the shocks (1:00)
    • Use your 15 mm wrench and a 13mm socket and ratchet to remove the bolts.
    • Use penetrating oil and an adjustable wrench and vice grips to help remove the nuts and bolts.
  2. step : Install the new shocks (4:00)
    • Assemble the washers and grommets onto the shocks and put them into place, putting the rest of the washers and grommets into place.
    • Bolt into place nice and tight.
    • Use a jack to lift the control arm to bolt the shock on the rest of the way.

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket

  • Specialty Tools

  • Vise-Grips

4.7 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
7
1
1
0
0
The Best
As always the order was simple and ordered on Friday, Received on that Monday just on regular ground. The parts where perfect fit except the passenger side upper ball joint is the same as drivers side. So had to go buy upper ball joint for passenger side. Was no big deal. Still saved around $500 for all the parts. Thanks A1
March 4, 2017
Purchased
1 year ago
Great suspension kit
I really love dealing with 1a auto this was a great suspension kit. Every part was a direct fit and easy to install. I live in Alaska so I don't get the free shipping but even with the extra shipping costs it was well worth the money and better than anything I could've gotten locally
April 16, 2017
Purchased
1 year ago
Goofed
It was the wrong kit for my sons truck. I was only able to use the lower ball joints.
Didn't realize the mistake until we had the kit for a couple of months. So if you need anything out of this kit I have everything but the lower ball joints.
June 28, 2017
Purchased
1 year ago
Parts were exact. And arrived fast. Will buy from here again.
April 9, 2018
Purchased
2 months ago
Great Price/Quality
Installed on my Lifted 99’ Mountaineer v8 5.0. Easy install. Shocks are a little thinner than usual but everything still lines up.
March 20, 2018
Purchased
2 months ago
Great price. Shipped fast. Good quality.
I was very happy with my parts. Got them in fast. Got my truck running again.
February 4, 2018
Purchased
3 months ago
Save Big Bucks!
Ford Explorer 2001 with a 160000 miles. I had to replace tires due to uneven wear so this kit saved money on the tires alone. With the help of a mechanically inclined friend we spent most of the day changing the front suspension including going to the parts store for rear shock absorbers. The car drives almost like knew now no problems with any of the parts.
February 24, 2018
Purchased
1 year ago
FRONT END FEELS LIKE NEW AGAIN
ALL PARTS WERE A PERFECT FIT. QUALITY SEEMED TO BE AS GOOD AS THE ORIGINAL
April 10, 2018
Purchased
1 month ago
Good Value for an Almost Complete Suspension Kit
The parts included in the kit were the correct parts for a 2000 Ford Explorer and I did not have any problem installing the parts.

The kit however, did not have all the parts to do a complete front end suspension replacement job. The kit should have included either the passenger side upper body mount control arm or replacement bushings as well as new rubber covers for the inner tie rods.

If you are going to go to all the effort of replacing the major parts why wouldn't you want to replace ALL OF THE OLD PARTS.
August 13, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 6 answers
Is this a complete kit for front left and right side for 02 ranger?
Jarrett G on Dec 18, 2017
BEST ANSWER: It was complete for a 96 explorer not sure on the ranger or year. Thought they were the same from 95 through at least 2001. But they may have changed in 02. The drivers side is a pita to get a-arm bolts out. Move the fuel, tranny and brake lines tward engine to get the rear out.
Will this work for a 2000 ford explorer 2wheel drive?
Kaggen J on Mar 29, 2018
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.

Vehicle Fit

  • 1998-2001 Ford Explorer 12 Piece Set Steering & Suspension Kit for Models with 2 Piece Passenger Side Upper Control Arm
  • 1998-2011 Ford Ranger 12 Piece Set Steering & Suspension Kit for Models with Front Torsion Bar Suspension 2 Piece Passenger Side Upper Control Arm
  • 2001-2009 Mazda B2300 Truck 12 Piece Set Steering & Suspension Kit for Models with Front Torsion Bar Suspension 2 Piece Passenger Side Upper Control Arm
  • 1998-2001 Mazda B2500 Truck 12 Piece Set Steering & Suspension Kit for Models with Front Torsion Bar Suspension 2 Piece Passenger Side Upper Control Arm
  • 1998-2007 Mazda B3000 Truck 12 Piece Set Steering & Suspension Kit for Models with Front Torsion Bar Suspension 2 Piece Passenger Side Upper Control Arm
  • 1998-2007 Mazda B4000 Truck 12 Piece Set Steering & Suspension Kit for Models with Front Torsion Bar Suspension 2 Piece Passenger Side Upper Control Arm
  • 1998-2001 Mercury Mountaineer 12 Piece Set Steering & Suspension Kit for Models with 2 Piece Passenger Side Upper Control Arm

This part replaces:

  • Hollander 511-01057AL
  • Hollander 511-01056AR
  • OE # F7ZZ3082CA
  • Dorman 520-221
  • Dorman 520-299
  • Moog K8694T, K80771
  • Moog EV317
  • Moog ES3461
  • Moog K7275
  • Moog K8708T
  • Moog K8710T
  • Reference Number D54309
  • OE # 5U2Z 18V124 MA
  • Monroe 32296
  • KYB 341302
Part #: 1ASFK03987


How-to Video:

(07:08 min)