Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 6
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Built to strict quality control standards
  • Direct replacements

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Inner Tie Rod (0:53)
    • Raise and secure the vehicle
    • Measure the length of the inner tie rod to the outer tie rod with a tape measure
    • Measure this length at extension and in compression
    • Note those measurements
    • Clean grease from the inner tie rod fitting
    • Loosen the inner tie rod from the steering rack with an adjustable wrench
    • Hold the outer tie rod in place with a wrench
    • Loosen the inner tie rod from the outer tie rod with the adjustable wrench
    • Remove the tie rod at the steering rack
    • Turn the inner tie rod counterclockwise to remove it from the outer tie rod
  2. step : Installing the New Inner Tie Rod (3:38)
    • Apply thread lock to the threads on the steering rack side of the inner tie rod
    • Use a floor jack to keep the stabilizer link above the working area
    • Thread the inner tie rod on to the steering rack
    • Tighten the inner tie rod to between 70 – 80 foot-pounds of torque
    • Twist the nut onto the outer end of the inner tie rod by hand
    • Turn the tire in to push the inner tie rod into the outer tie rod
  3. step : Adjusting the Inner Tie Rod (6:19)
    • Measure the length of the inner tie rod to the outer tie rod with a tape measure
    • Turn the inner tie rod with the adjustable wrench until its length is the noted length from Step 1
  4. step : Greasing the Fittings (7:33)
    • Use a grease gun to add grease to the inner tie rod fitting
    • Add grease until the tie rod boot starts to change shape
    • Add grease to other fittings as necessary

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Liquid Thread Locker
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Torque Wrench

  • Specialty Tools

  • Grease Gun

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
1
0
0
Awesome service, prices, and shipping!
When calling around to local mechanics, I found the parts I was looking for were extremely expensive. After watching instructional videos From 1aauto I decided to give it a try....I was blown away with the prices the free shipping and the instructional videos for everything. I can't say enough about 1aauto. I am more than pleased with the service that I received in the extremely fast shipping for being free. Thank you; you have earned my business for as long as I own a vehicle.
July 11, 2017
Purchased
7 months ago
half right
sway bars and inner tie rods were right and fit well, outter tie rods wrong ones, cant get to your return section to return them...hassle fee returns my but.
September 12, 2017
Purchased
5 months ago
Response from 1A Auto
We are sorry to hear that the return request form is not populating. Please call us at 1-888-844-3393 to finalize this return.
September 12, 2017
Alex PStaff
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this work on a 2001 base chevy silverado 1500?
Juan R on Jun 13, 2017
BEST ANSWER: These are specific to the HD model Silverados, not the base model 1500.

How-to Video:

(08:32 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Bearing Grease
  • Liquid Thread Locker
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Ratchets & Related

  • Torque Wrench

  • Specialty Tools

  • Grease Gun



This part replaces:

  • OE # 10385580
  • OE # 12542993
  • OE # 12546193
  • OE # 15070821
  • OE # 15167767
  • OE # 15295861
  • OE # 15835052
  • OE # 15840266
  • OE # 15891515
  • OE # 26059210
  • Moog ES3609
  • Moog ES3488
  • OE # 15295861, 26059210
  • Moog K80631

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 Steering & Suspension Kit 6 Piece Set
  • 2001-2003 Chevy Silverado 1500 HD Steering & Suspension Kit 6 Piece Set
  • 2005-2006 Chevy Silverado 1500 HD Steering & Suspension Kit 6 Piece Set
  • 2007 Chevy Silverado 1500 HD Classic Steering & Suspension Kit 6 Piece Set
  • 1999-2004 Chevy Silverado 2500 Steering & Suspension Kit 6 Piece Set
  • 2001-2010 Chevy Silverado 2500 HD Steering & Suspension Kit 6 Piece Set
  • 2007 Chevy Silverado 2500 HD Classic Steering & Suspension Kit 6 Piece Set
  • 2001-2010 Chevy Silverado 3500 Steering & Suspension Kit 6 Piece Set
  • 2007 Chevy Silverado 3500 Classic Steering & Suspension Kit 6 Piece Set
  • 2001-2006 Chevy Suburban 2500 Steering & Suspension Kit 6 Piece Set
  • 2001-2003 GMC Sierra 1500 HD Steering & Suspension Kit 6 Piece Set
  • 2005-2006 GMC Sierra 1500 HD Steering & Suspension Kit 6 Piece Set
  • 2007 GMC Sierra 1500 HD Classic Steering & Suspension Kit 6 Piece Set
  • 1999-2004 GMC Sierra 2500 Steering & Suspension Kit 6 Piece Set
  • 2001-2010 GMC Sierra 2500 HD Steering & Suspension Kit 6 Piece Set
  • 2007 GMC Sierra 2500 HD Classic Steering & Suspension Kit 6 Piece Set
  • 2001-2010 GMC Sierra 3500 Steering & Suspension Kit 6 Piece Set
  • 2007 GMC Sierra 3500 Classic Steering & Suspension Kit 6 Piece Set
  • 2001-2006 GMC Yukon XL 2500 Steering & Suspension Kit 6 Piece Set
  • 2003-2009 Hummer H2 Steering & Suspension Kit 6 Piece Set
Part #: 1ASFK03800

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More