Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 6 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
1
0
0
parts were new and fit right. some of the parts were made in chine some made in Taiwan.. The parts arrived on time as it was expected. It was the most affordable place to buy my part. I am very glad I found them here. Thank you!
August 5, 2017
Purchased
10 months ago
Not bad for the price....but like all things you get what you pay for.
February 3, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2004 Chrysler Town & Country 6 Piece Set Steering & Suspension Kit
  • 2001-2002 Chrysler Voyager 6 Piece Set Steering & Suspension Kit
  • 2001-2004 Dodge Caravan 6 Piece Set Steering & Suspension Kit
  • 2001-2004 Dodge Grand Caravan 6 Piece Set Steering & Suspension Kit

This part replaces:

  • Dorman 520-342
  • Dorman 520-341
  • Hollander 512-01265L
  • Hollander 512-01264R
  • OE # 4743377AC
  • OE # 5066373AA
  • OE # 4743376AC
  • Moog K7258
  • Moog K620005
  • Moog K620004
  • Moog ES3537
Part #: 1ASFK03656

Out of Stock

How-to Video:

(07:55 min)