Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:38)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Pull off the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Control Arm (3:26)
    • Remove the two 17mm nuts connecting the ball joint to the control arm
    • Remove the 17mm bolt connecting the ball joint to the control arm
    • Separate the ball joint from the control arm with a pry bar
    • Remove the two 19mm bolts from the front of the control arm
    • Remove the 19mm bolt from the rear of the control arm
    • Remove the control arm with a pry bar
  3. step : Installing the Control Arm (6:25)
    • Put the rear control arm bushing into place
    • Start the 19mm bolt into the control arm bushing
    • Position the control arm, using a pry bar if necessary
    • Insert the longer 19mm bolt into the rear of the control arm bracket
    • Insert the shorter 19mm bolt into the front of the control arm bracket
    • Pry the control arm into place
    • Fasten the 17mm nuts onto the ball joint bracket
    • Insert the 17mm bolt into the ball joint bracket
    • Tighten the two 17mm nuts to 94 foot-pounds of torque
    • Tighten the 17mm bots to 94 foot-pounds
    • Tighten the three 19mm bolts to 152 foot-pounds
  4. step : Reattaching the Wheel (9:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts 76 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 22mm Socket
  • 19mm Socket
  • 17mm Socket
  • 12mm Socket

4.3 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
1
0
0
steering and suspension kit
Every single part was perfect fit. Easy to install instructions on the videos. My car don't swing anymore while changing lanes on the freeway. And the best of all the prize I paid was great. Yessss I recommend this parts to other people because they are safe and affordable
March 20, 2017
Purchased
1 year ago
the holes were just a little off from the orginals on my car. But was able to make it work.
January 30, 2017
Purchased
1 year ago
Very Pleased!
I am so glad to have found you folks. I would offer on bit of encouragement. My order was split into two deliveries. One came within the suggested time frame. The other was eight days later. I am glad that this was not a customer's vehicle. One of my employee's was working on his mom's car.
Perhaps you could notify folks if there is a delay in an order shipping or if the order is split. Just a suggestion...we are very pleased and will use you folk in the future. I also encourage any folk to use this company. Well done y'all.
January 25, 2017
Purchased
1 year ago
Awesome Kit!
Arrived superfast and went on almost as fast and easy as ordering and shipping were.
Revived the ride and feel of my 99 Camry!

This company puts out quality HowTo videos and delivers great parts for the price, fast, with awesome quality controls and customer service.
January 24, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-2000 Lexus ES300 8 Piece Set Steering & Suspension Kit
  • 2001 Lexus ES300 (Built Before 7/01 Production Date) 8 Piece Set Steering & Suspension Kit
  • 1995-1997 Toyota Avalon 8 Piece Set Steering & Suspension Kit
  • 1992-2000 Toyota Camry 8 Piece Set Steering & Suspension Kit
  • 2001 Toyota Camry (Built Before 7/01 Production Date) 8 Piece Set Steering & Suspension Kit

This part replaces:

  • Dorman 520-405
  • Dorman 520-406
  • Hollander 512-58289L; 512-58385AL
  • Hollander 512-58289R; 512-58385AR
  • OE # 48069-33020; 48069-33031
  • OE # 4333039435
  • OE # 48068-33020; 48068-33031
  • OE # 4504629255
  • OE # 4550339135, 4550329355
  • Moog K9499
  • Moog EV301
  • Moog ES3306
  • Moog K620051
  • Moog K620052
Part #: 1ASFK03481

Out of Stock

How-to Video:

(11:29 min)