Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Bearing Type:   Ball Bearing
  • Quantity:   16 Piece Set
  • Kit Includes:
      (2) Tie Rod Adjusting Sleeves
      (2) Front Lower Ball Joints
      (1) Pitman Arm
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Hub Assemblies
      (2) Front Upper Ball Joints
      (1) Idler Arm
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as a Set of 16
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Install the new hub (1:11)
    • Apply the O ring to the new hub
    • Use a grease gun to apply grease to the lower ball joint, upper ball joint and tie rod end.
    • Feed the ABS wiring for the hub through the dust guard and mount the hub.
    • Thread in the three bolts and tighten them up evenly.
    • Torque these bolts to 65 ft lbs.
    • Clip the wiring harness up using the 10 and 13 mm bolts to secure the clips.
    • Connect the wiring harness.
  2. step : Assemble the brakes (4:10)
    • Put the rotor on the hub.
    • Mount the caliper bracket, pads and caliper.
    • Torque the bolts on the caliper to 50-60 ft lbs.
  3. step : Put the wheel back on (5:04)
    • Put the hub nut back on.
    • Put the wheel back on and thread the lug nuts.
    • Lower the vehicle.
    • Torque the hub nut to 90 ft lbs.
    • Use a star pattern to torque the lug nuts to 75 ft lbs.
    • Put the cap and lug nut covers back on.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Torque Wrench
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 13mm Socket
  • 14mm Socket
  • 19mm Socket
  • 15mm Socket
  • 16mm Socket
  • 10mm Socket
  • 34mm Socket
  • 18mm Socket
  • 17mm Socket
  • 11mm Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Good kit
Defiantly a quality kit and good for the price. Did it last weekend in about 14 hours start to finish. Better to buy this kit then anything else. All parts look good and better then the OEM.
January 21, 2017
Parts fit great, good quality, videos very helpful. Wll buy from A-1 Auto again. A repair shop wanted over $1000.00 for the parts I paid only $150.00 for. Pretty simple decision
March 4, 2017
Parts all fit perfectly
my parts order arrived in a very timely matter no more needs to be said, Price was good TY
May 29, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Is this kit repair for both sides of a suspension rebuild, passenger and drivers side or do I need to purchase 2?
Melissa G January 25, 2017
Its for both sides. Matt
Amy K January 25, 2017
Both sides. Only need 1 kit.
Nick N January 25, 2017
This kit is for ALL of your steering and suspension needs both driver and passenger sides the only thing not included is shocks and bushings is a great kit and you cant beat the price Ive installed it on my vehicle and my front end feels great.
Spenser R January 25, 2017
this kit is good for both sides of the vehicle, no need to purchase 2
HECTOR T January 25, 2017
THis kit repairs both side of your vehicle.
Sonja W January 25, 2017
This kit will contain parts for both driver and passenger side on your vehicle.
Alex P January 25, 2017
Does this kit include the adjustment sleeves?
Russell K June 22, 2017
yes, it comes with the tie rod adjusting sleeves
Rick W June 22, 2017
Russell yes this kit does include the adjustment sleeves
Tom S June 22, 2017
Yes, the adjustment sleeves are included.
Alex P June 22, 2017
Yes it does come with the adjustment sleeves. I bought this kit and loved it. Good cheap replacement parts for an older vehicle.
Larry S June 22, 2017
Christopher M June 22, 2017
Will this be an exact fit for my 98 chevy blazer ls?
Williy A August 3, 2018
This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit.
Jessica D August 3, 2018
I have a 2000 Chevy Blazer ls, and it fits mine. I use washers under both upper and lower ball joints and for the tie rod ends. Otherwise my steering is extremely sloppy.
Sonja W August 4, 2018
Yes, though I did not use the pitman or idler arm. All other parts were an exact fit. I’m sure those parts are an exact fit as well, I just didn’t use them.
Ron W August 4, 2018
the kit is complete for the front end and parts are quality replacements
Stephen Lee H August 5, 2018
This kit fit my 02 Blazer correctly with no changes or modifications. The original ball joints were riveted on and the rivets had to be removed with a grinder. The replacements are bolt on. Make sure they are properly torqued. Overdoing it will wring the bolt off. No problems with performance after installation.
Ed R August 5, 2018
Year Make Model Description
1998Chevy Blazer S10 Chevy Blazer S10 4 Wheel Drive Steering & Suspension Kit for Models with Offset Tie Rod 16 Piece Set
1999-2005Chevy Blazer S10 Chevy Blazer S10 4 Wheel Drive Steering & Suspension Kit 16 Piece Set
1998-2004Chevy S10 Pickup Chevy S10 Pickup 4 Wheel Drive Steering & Suspension Kit for Models with Offset Tie Rod 16 Piece Set
1999-2001GMC Jimmy S-15 GMC Jimmy S-15 4 Wheel Drive Steering & Suspension Kit for Models with Offset Tie Rod 16 Piece Set
1998GMC S-15 Sonoma GMC S-15 Sonoma 4 Wheel Drive Steering & Suspension Kit 16 Piece Set for Models with Offset Tie Rod
1999-2004GMC S-15 Sonoma GMC S-15 Sonoma 4 Wheel Drive Steering & Suspension Kit 16 Piece Set
1998Isuzu Hombre Isuzu Hombre 4 Wheel Drive Steering & Suspension Kit 16 Piece Set for Models with Offset Tie Rod
1999-2000Isuzu Hombre Isuzu Hombre Steering & Suspension Kit 4 Wheel Drive 16 Piece Set
1999-2001Oldsmobile Bravada Olds Bravada Steering & Suspension Kit 4 Wheel Drive 16 Piece Set
Part #: 1ASFK03439

Out of Stock

How-to Video:

(06:54 min)