Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 6
  • Direct replacements
  • built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:06)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:31)
    • Hold the upper stabilizer link stud with an 18mm inch wrench
    • Apply penetrating oil to the stabilizer link nuts
    • Remove the upper nut from the stabilizer link with an 18mm socket and ratchet
    • Support the stabilizer link with a jack
    • Hold the lower stabilizer link stud with a 18mm inch wrench
    • Remove the lower nut from the stabilizer link with an 18mm socket and breaker bar
    • Pull off the stabilizer link
  3. step : Installing the New Stabilizer Link (3:48)
    • Push the new stabilizer link into place
    • Start the 19mm nuts onto the new stabilizer link
    • Tighten the 19mm nuts to between 45 - 50 foot-pounds of torque
  4. step : Reattaching the Wheel (4:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Great replacement Parts
All parts fit well. No modifications required.
Lock nuts were oblong to the extent that they would not install onto the threads. Replaced with nuts and Locktite.
Great replacement parts for price.
November 28, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chevy Cobalt Steering & Suspension Kit 6 Piece Set for Models with RPO Code FE1 (Soft Ride Suspension)
  • 2007-2010 Pontiac G5 Steering & Suspension Kit 6 Piece Set for Models with RPO Code FE1 (Soft Ride Suspension)
  • 2005-2006 Pontiac Pursuit Steering & Suspension Kit 6 Piece Set for Models with RPO Code FE1 (Soft Ride Suspension)
  • 2005 Saturn Ion Sedan Steering & Suspension Kit for Models with RPO Code FE1 (Soft Ride Suspension) (From VIN 5Z133876) 6 Piece Set
  • 2005 Saturn Ion Quad Coupe Steering & Suspension Kit for Models with RPO Code FE1 (Soft Ride Suspension) (From VIN 5Z133876) 6 Piece Set
  • 2006-2007 Saturn Ion Steering & Suspension Kit 6 Piece Set for Models with RPO Code FE1 (Soft Ride Suspension)

This part replaces:

  • Dorman 521-322
  • Dorman 521-321
  • Hollander 512-01459R
  • Hollander 512-01460L
  • OE # 22664783, 15220347, 15140337
  • OE # 15803769, 25984681
  • OE # 15803768, 25984680
  • Moog K80252
  • Moog K620302
  • Moog K620301
  • Moog ES800030
  • OE # 20784686
Part #: 1ASFK03295


How-to Video:

(04:55 min)