Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 6 piece kit
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Inner Tie Rods
  • Quantity: 6 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (1:06)
    • Loosen the lug nut covers with a 19mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:31)
    • Hold the upper stabilizer link stud with an 18mm inch wrench
    • Apply penetrating oil to the stabilizer link nuts
    • Remove the upper nut from the stabilizer link with an 18mm socket and ratchet
    • Support the stabilizer link with a jack
    • Hold the lower stabilizer link stud with a 18mm inch wrench
    • Remove the lower nut from the stabilizer link with an 18mm socket and breaker bar
    • Pull off the stabilizer link
  3. step : Installing the New Stabilizer Link (3:48)
    • Push the new stabilizer link into place
    • Start the 19mm nuts onto the new stabilizer link
    • Tighten the 19mm nuts to between 45 - 50 foot-pounds of torque
  4. step : Reattaching the Wheel (4:12)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 15mm Wrench
  • 18mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Sway bar links
The steering kit was fine except for the sway bar links. You sent 12 inch links and I needed 10 inch. I had to purchase the 10 inch from a local auto parts store. Everything else worked fine. Slow delivery because of the holidays but not your fault. I would recommend 1a to other people.
January 7, 2018
Purchased
6 months ago
Steering and Suspension Kit for a 2008 Chevy Cobalt
This kit is amazing! Most reliable and affordable parts I've seen yet.
August 21, 2017
Purchased
1 year ago
Exactly what I ordered. Shipping was awesome. Received faster than expected. Good quality parts.
July 15, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2010 Chevy Cobalt 6 Piece Set Steering & Suspension Kit for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2006-2010 Chevy HHR 6 Piece Set Steering & Suspension Kit for Models with 300mm Front Sway Bar Links for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2007-2009 Pontiac G5 6 Piece Set Steering & Suspension Kit for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2005-2006 Pontiac Pursuit 6 Piece Set Steering & Suspension Kit for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2005-2007 Saturn Ion 6 Piece Set Steering & Suspension Kit

This part replaces:

  • OE # 20784686
  • OE # 22664783, 15220347, 15140337
  • OE # 25956915, 15816430
  • Moog K80252
  • Moog ES800030
  • Moog EV80445
Part #: 1ASFK03032

How-to Video:

(04:55 min)