Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 6
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:48)
    • Removing the Wheel
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 35mm nut but don't remove it
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:32)
    • Using locking pliers to clip onto the top of the stabilizer link
    • Then remove 14mm bolt from bottom of the stabilizer link
    • Remove the stabilizer link with a hammer or reciprocating saw
  3. step : Removing the Axle (2:41)
    • Use a pry bar to hold the hub in place
    • Loosen and remove the 15mm bolts
    • Hammer the axle over to the side to release it
    • Pull it straight back and out of the wheel and down and out
  4. step : Reinstalling the Axle (3:34)
    • Feed the axle into the place
    • Line up the back and replace the 15mm bolts
    • Use a pry bar to hold the hub in place
    • Torque each bolt to 65 ft/lbs
  5. step : Replacing the Stabilizer Link (4:51)
    • Put the stabilizer piece back into place
    • Use four washers, four grommets, and a tube
    • Use a jack stand to help push it through till it appears through the top
    • Tighten the 14mm bolt on the stabilizer link
    • Tighten until the bushings are the same diameter as the washers
  6. step : Replacing the Wheel (6:18)
    • Replace and tighten the 35mm nut
    • Put the tire in place
    • Replace and tighten each lug nut
    • Torque each lug nut in a crossing pattern to 100 ft/lbs
    • Torque the center hub nut to 160 ft/lbs
    • Replace the hub cap and tighten the lug nut caps

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Sawzall

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 15mm Socket
  • 22mm Socket
  • 35mm Socket
  • 36mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Cadillac Escalade All Wheel Drive Front Steering & Suspension Kit 6 Piece Set
  • 2003-2006 Cadillac Escalade ESV All Wheel Drive Front Steering & Suspension Kit 6 Piece Set
  • 2002-2006 Cadillac Escalade EXT All Wheel Drive Front Steering & Suspension Kit 6 Piece Set
  • 2002-2006 Chevy Avalanche 1500 4 Wheel Drive Front Steering & Suspension Kit 6 Piece Set
  • 1999-2003 Chevy Silverado 1500 4 Wheel Drive Front Steering & Suspension Kit (excluding Crew Cab) 6 Piece Set
  • 2004-2006 Chevy Silverado 1500 4 Wheel Drive Front Steering & Suspension Kit for Models with 6 Lug Wheels 6 Piece Set
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive Front Steering & Suspension Kit for Models with 6 Lug Wheels 6 Piece Set
  • 2000-2006 Chevy Suburban 1500 4 Wheel Drive Front Steering & Suspension Kit 6 Piece Set
  • 2000 Chevy Tahoe 4 Wheel Drive Front Steering & Suspension Kit (excluding Z71 Models) 6 Piece Set
  • 2001-2006 Chevy Tahoe 4 Wheel Drive Front Steering & Suspension Kit 6 Piece Set
  • 1999-2003 GMC Sierra 1500 4 Wheel Drive Front Steering & Suspension Kit (excluding Crew Cab) 6 Piece Set
  • 2004-2006 GMC Sierra 1500 4 Wheel Drive Front Steering & Suspension Kit for Models with 6 Lug Wheels 6 Piece Set
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive Front Steering & Suspension Kit for Models with 6 Lug Wheels 6 Piece Set
  • 2000 GMC Yukon Front 4 Wheel Drive Steering & Suspension Kit (excluding Denali Models) 6 Piece Set
  • 2001-2006 GMC Yukon 4 Wheel Drive Front Steering & Suspension Kit 6 Piece Set
  • 2000-2006 GMC Yukon XL 1500 4 Wheel Drive Front Steering & Suspension Kit 6 Piece Set

This part replaces:

  • A1 Cardone 66-1009
  • Dorman 4110300
  • Hollander 447-02433
  • Hollander 538-01481
  • OE # 19149617
  • OE # 26069252
  • OE # 15112382
  • Moog ES3493T
  • Dorman 951-008
  • Reference Number 515036
Part #: 1ASFK03014


How-to Video:

(07:40 min)