Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a Set of 8
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Strut & Spring Assemblies
  • Kit Includes: (2) Front Inner Tie Rods
  • Quantity: 8 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Remove the top of the strut (1:07)
    • Lift the hood and secure it.
    • Remove the three 13 mm nuts in the engine bay securing the top of the strut.
    • Keep two of them loosely threaded just to keep the strut from flopping around while you work on the bottom half.
  2. step : Remove the wheels (1:37)
    • Use a 19 mm lug wrench to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  3. step : Remove the stabilizer link (2:03)
    • Use an 18 mm wrench and an 18 mm socket and ratchet to remove the stabilizer link.
    • A breaker bar can help get it loose, using the wrench to secure the back of the bolt.
  4. step : Remove the bottom of the strut (3:01)
    • Apply some penetrating oil to the two 18 mm nuts securing the strut to the steering knuckle.
    • Work the bolts out of the steering knuckle and strut.
    • Unthread the top two nuts and pull the strut down and out.
  5. step : Install the new strut (4:35)
    • Put the strut into place and thread one of the bolts through the bottom of the strut and the steering knuckle.
    • This secures the strut so you can secure the top three nuts.
    • Torque the two bolts at the bottom to 100 ft lbs.
    • Reassemble the stabilizer link.
    • Replace the wheel, using a star pattern on the lug nuts.
    • Torque the top three nuts to 20 ft lbs.
    • Torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 16mm Socket
  • 15mm Socket
  • 19mm Socket
  • 13mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

2.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
0
1
0
I'm still waiting on someone to get back to me
I'm still waiting on someone to get back to me. Only the springs fit and the rest of the kit did not.
They're just sitting there in the box and I have no use for those parts. How do I return them?
June 23, 2017
Purchased
1 year ago
Response from 1A Auto
Please call us at 1-888-844-3393 for a proper resolution.
June 23, 2017
Alex P Staff
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Is this the same as the FE5 performance package or is this base model components?
Cody J on Apr 10, 2018
BEST ANSWER: This part is not listed to fit the performance vehicle. We may have a part that is listed to fit! Please search our site using your vehicle info and then choose the appropriate category. All the parts we carry are guaranteed to fit the vehicle they are listed for. Thank you!

Vehicle Fit

  • 2005-2009 Chevy Cobalt SS 8 Piece Set Steering & Suspension Kit
  • 2006-2007 Chevy HHR 8 Piece Set Steering & Suspension Kit 9.86 Inch Length Center to Center Sway Bar Link
  • 2007-2009 Pontiac G5 8 Piece Set Steering & Suspension Kit

This part replaces:

  • OE # 22664783, 15220347, 15140337
  • OE # 25956915, 15816430
  • OE # 15787554, 20784688, 22708767
  • Moog ES800030
  • Moog EV80445
  • Moog K750012
  • Monroe 182179L
  • Monroe 182179R
  • Monroe 172179L
  • Monroe 172179R
  • KYB SR4057
  • KYB SR4056
Part #: 1ASFK02976


Order must be placed by 4pm ET

How-to Video:

(07:21 min)