Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the top of the strut (1:07)
    • Lift the hood and secure it.
    • Remove the three 13 mm nuts in the engine bay securing the top of the strut.
    • Keep two of them loosely threaded just to keep the strut from flopping around while you work on the bottom half.
  2. step : Remove the wheels (1:37)
    • Use a 19 mm lug wrench to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  3. step : Remove the stabilizer link (2:03)
    • Use an 18 mm wrench and an 18 mm socket and ratchet to remove the stabilizer link.
    • A breaker bar can help get it loose, using the wrench to secure the back of the bolt.
  4. step : Remove the bottom of the strut (3:01)
    • Apply some penetrating oil to the two 18 mm nuts securing the strut to the steering knuckle.
    • Work the bolts out of the steering knuckle and strut.
    • Unthread the top two nuts and pull the strut down and out.
  5. step : Install the new strut (4:35)
    • Put the strut into place and thread one of the bolts through the bottom of the strut and the steering knuckle.
    • This secures the strut so you can secure the top three nuts.
    • Torque the two bolts at the bottom to 100 ft lbs.
    • Reassemble the stabilizer link.
    • Replace the wheel, using a star pattern on the lug nuts.
    • Torque the top three nuts to 20 ft lbs.
    • Torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 16mm Socket
  • 15mm Socket
  • 19mm Socket
  • 13mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

4.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
1
The parts are great i had just one issue w/size on a couple parts but overall good
December 15, 2017
Purchased
5 months ago
Awesome prices
Much cheaper than local auto parts stores like O'Reilly, autozone, etc.
September 13, 2017
Purchased
8 months ago
Great value!
Great product! Great value! Would highly recommend A1 Auto to anyone looking for great products at an affordable price and have already sent a few friends your way! Thanks!
March 8, 2017
Purchased
1 year ago
Do not recommend
The ordering and shipping was fast, easy and quick. That is about all that was good. The struts seem to be inferior. The left strut is ok ,but the right one is annoyingly noisy. The threads on the links were terrible one was able to be rethreaded one is junk. The tie rods don't appear to be as sturdy as the originals. The pleasant surprise was that they had grease fittings.
February 27, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
What is the RPO code FE5 mean?
Robert P on Jul 13, 2017
BEST ANSWER: FE5 means that you have a performance handling suspension.

SUSPENSION SYSTEM RIDE, HANDLING, PERFORMANCE (FE5)

Vehicle Fit

  • 2005-2010 Chevy Cobalt 8 Piece Set Steering & Suspension Kit for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2006-2010 Chevy HHR 8 Piece Set Steering & Suspension Kit for Models without RPO Code FE5 (Performance Ride Handling Suspension) (excluding SS Models)
  • 2007-2010 Pontiac G5 8 Piece Set Steering & Suspension Kit
  • 2005-2006 Pontiac Pursuit 8 Piece Set Steering & Suspension Kit

This part replaces:

  • OE # 20784686
  • OE # 22664783, 15220347, 15140337
  • OE # 25956915, 15816430
  • Moog K80252
  • Moog ES800030
  • Moog EV80445
  • Monroe 182179L
  • Monroe 182179R
  • Monroe 172179L
  • Monroe 172179R
  • KYB SR4057
  • KYB SR4056
Part #: 1ASFK02820


How-to Video:

(07:21 min)