Replaces

Steering & Suspension Kit - 1ASFK02619

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Strut & Spring Assemblies
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering and Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Great value but NOT exact fit.
I would really give this three and a half stars. We shall see about durability, but certainly the replacement struts and springs appear to be just as sturdy as the originals I had to replace due to rusting out of the spring housing. BUT, and this is why I cannot really say these are exact fit, I had to widen the front mount hole for each strut to get it to fit through all three mounting holes to attach the nuts. Something was off by just about an 1/8th of an inch. I didnt like drilling through the metal of the car, but one I did, I was able to complete the installation. I cannot speak to the fit of the ball joints or tie rod ends, as mine were in good enough nick to leave them alone. But the sway bar links were a perfect fit and the wheels were aligned without any problems...all at a very reasonable cost. Thanks.
February 7, 2017
1996 Dodge steering & suspension kit
All the parts were sent on time and accurate/complete. They were more affordable than other parts sites and work great. I will order from A-1 again!
April 3, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1996-2000Chrysler Town & Country Chrysler Town & Country 10 Piece Set Steering & Suspension Kit
2000Chrysler Voyager Chrysler Voyager 10 Piece Set Steering & Suspension Kit
1996-2000Dodge Caravan Dodge Caravan 10 Piece Set Steering & Suspension Kit
1996-2000Dodge Grand Caravan Dodge Grand Caravan 10 Piece Set Steering & Suspension Kit
1996-2000Plymouth Grand Voyager Plymouth Grand Voyager 10 Piece Set Steering & Suspension Kit
1996-2000Plymouth Voyager Plymouth Voyager 10 Piece Set Steering & Suspension Kit
Part #: 1ASFK02619


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:55 min)