Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   14 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Tie Rod Adjusting Sleeves
      (1) Pitman Arm
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (1) Idler Arm
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 14 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Stabilizer Links (1:37)
    • Turn the wheels for access to the stabilizer link.
    • Spray the stabilizer with penetrating oil.
    • 9/16â€� socket on the bottom and a 15mm socket on the top. Loosen the stabilizer link.
    • Use a hammer and punch to push the link out.
    • Use vice grips if needed.
  2. step : Replacing the Stabilizer Link (3:08)
    • Push the link up into place.
    • Put the link together in this order:
    • Bushing on the bottom of the control arm.
    • Bushing above the control arm.
    • Washer
    • Shaft
    • Washer
    • Bushing
    • Bushing
    • Washer
    • Nut.
    • Tighten the stabilizer to 15-17ft/lbs.

Tools needed for replacement:

    General Tools

  • Center Punch
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 14mm Socket

  • Sockets - SAE

  • 9/16 Inch Socket

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Great fit, excellent shipping
Received the parts quickly, and installed with no issues. The parts looked just like the original parts (except brand new), and were just as descriped. My truck has now passed inspection with the help of 1A Auto and their highly competitive pricing.
October 26, 2017
Excellent Service
Very fast shipping Will buy from again Box broke open during shipping Could use some reinforcement on corners of boxes but thats a shipping issue
April 20, 2018
Steering & Suspension kit
Perfect fit. Every piece bolted right on. I would highly recommend 1-A Auto to anybody. Thank you so much.
September 22, 2018
Highly recommended
Very satisfied wit 1a auto. Parts were shipped the day I purchased and I recieved them within a couple days. The price for the complete steering/suspension package was much cheaper than i couldve gotten just a few of the parts for if Id gone to an auto parts store. The parts were very good quality too. I highly recommend 1a auto and will continue to use them for all my auto parts needs in the future!
September 25, 2018
Fast, easy, fair.
Fast shipping and easy to install. Reasonably priced as well.
October 8, 2018
Great price - everything fit and functioned well!
The shop quote for this was quite high. The kit was a great price, included everything that the shop indicated needing replacement and more. Installation was work, but straightforward, and the 1A Auto videos helped the process a lot. Would do it again, and recommend this kit for anyone with a similar vehicle that needs the same amount of work. My son and I replaced everything on a weekend, then he had it aligned and its good to go. Shipping was quick, and everything was well packed. Thanks 1A Auto!
October 27, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will this fit 2003 f150 fx4?
Randy L August 14, 2018
Yes, this kit is listed to be a direct fit for the 2003 Fords F150 4x4 as long as your vehicle is equipped with a 2.48" Bolt Pattern Idler Arm. Please let us know if you need further assistance, thank you.
Jessica D August 14, 2018
Year Make Model Description
1997-2002Ford Expedition Ford Expedition 4 Wheel Drive with 2.48" Bolt Pattern Idler Arm Steering & Suspension Kit 14 Piece Set
2004Ford F150 Heritage Truck Ford F150 Heritage Truck 4 Wheel Drive with 2.48" Bolt Pattern Idler Arm Steering & Suspension Kit 14 Piece Set
1997-2003Ford F150 Truck Ford F150 Truck 4 Wheel Drive with 2.48" Bolt Pattern Idler Arm Steering & Suspension Kit 14 Piece Set
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck 4 Wheel Drive with 2.48" Bolt Pattern Idler Arm Steering & Suspension Kit 14 Piece Set
1998-2002Lincoln Navigator Lincoln Navigator 4 Wheel Drive with 2.48" Bolt Pattern Idler Arm Steering & Suspension Kit 14 Piece Set
Part #: 1ASFK02594


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:08 min)