Steering & Suspension Kit - 1ASFK02582

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   12 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Tie Rod Adjusting Sleeves
      (2) Front Upper Control Arms with Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Stabilizer Links (1:37)
    • Turn the wheels for access to the stabilizer link.
    • Spray the stabilizer with penetrating oil.
    • 9/16â€� socket on the bottom and a 15mm socket on the top. Loosen the stabilizer link.
    • Use a hammer and punch to push the link out.
    • Use vice grips if needed.
  2. step : Replacing the Stabilizer Link (3:08)
    • Push the link up into place.
    • Put the link together in this order:
    • Bushing on the bottom of the control arm.
    • Bushing above the control arm.
    • Washer
    • Shaft
    • Washer
    • Bushing
    • Bushing
    • Washer
    • Nut.
    • Tighten the stabilizer to 15-17ft/lbs.

Tools needed for replacement:

    General Tools

  • Center Punch
  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 14mm Socket

  • Sockets - SAE

  • 9/16 Inch Socket

4.33/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Good parts
No way to greese upper control arm but otherwise solid parts.
March 3, 2017
Love it prices are low and the quality is high Will do more shopping and Tell my friends
March 8, 2017
Everything went as it should
I was a little skeptical about ordering car parts on-line, but this was a pleasant surprise. My order arrived within a few days. I bought the tools I needed for the install. Then I got to it, everything fit well and Ive been up and down the road ever since. is the real deal.
March 13, 2017
Very good
Every thing was delivered as expected in a few short days. Everything fit the truck perfectly. Well done
August 15, 2017
Didnt have the grease fitting on the passanger side part.
October 28, 2018
Remarkable Service
The parts where ship promptly, and securely & well pack for miniumm damage to parts. The pricingwas unbelieavble, and was the cheapest I had founf for such quality products. I have recommended this supplier to my fireinds and have recently bought spark plugs and coil packs for my friends- Ford Explorer, he save over $100.00 Note the product quality is very good.
December 27, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What brand are these parts?
Steven M December 31, 2016
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Brian F January 1, 2017
Is this kit for the 2wd models?
Kristian L October 22, 2018
If this is the same kit i bought my truck is a 4x4 it worked on it dont think this kit will fit 2x4 was a good deal though
D A October 22, 2018
Yes, it fit my 2wd perfectly. Very satisfied with it.
J A October 22, 2018
Rufus L October 22, 2018
Ramona C October 22, 2018
Yes it’s and that’s fits perfectly
A N October 22, 2018
Yes this kit is listed to fit RWD models.
Christa R October 22, 2018
Year Make Model Description
1997-2002Ford Expedition Ford Expedition Rear Wheel Drive 12 Piece Set Steering & Suspension Kit
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Rear Wheel Drive 12 Piece Set Steering & Suspension Kit
1997-2003Ford F150 Truck Ford F150 Truck Rear Wheel Drive 12 Piece Set Steering & Suspension Kit
1997-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck Rear Wheel Drive 12 Piece Set Steering & Suspension Kit
2002Lincoln Blackwood Lincoln Blackwood Rear Wheel Drive 12 Piece Set Steering & Suspension Kit
1998-2002Lincoln Navigator Lincoln Navigator Rear Wheel Drive 12 Piece Set Steering & Suspension Kit
Part #: 1ASFK02582

Out of Stock

How-to Video:

(05:08 min)