Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Tie Rod Adjusting Sleeves
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 10 Piece Set
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Diagnosis (1:15)
    • To check to see if you have a bad pitman arm, jack up your car and secure it.
    • Move your wheel and if there is play in your pitman arm and joint.
  2. step : Remove the skid plate (1:55)
    • Unbolt the four 15 mm bolts.
    • Remove the kid plate and set aside.
  3. step : Prepare the steering box to access the pitman arm (2:10)
    • Unclip and move aside the plastic shield.
    • Spray the two fittings and the bolt with penetrating oil.
    • Loosen the power steering coupling bolt.
    • Use a fitting wrench to remove the two fittings and an 11 mm socket and ratchet and extension to remove the bolt.
    • Have a helper hold the steering wheel for you while you do this to make it easier.
    • Use a pry bar to move the steering shaft from the steering box.
  4. step : Remove the steering box and pitman arm (4:35)
    • Use a 21 mm bolt to remove the bolt mounting the pitman arm.
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three bolts securing the steering box and remove the steering box completely to remove the pitman arm.
    • Put the steering box and pit man arm in an oil pan.
    • Use an impact wrench or a large breaker bar as well as a pitman arm puller to remove the pitman arm from the steering arm.
  5. step : For reinstallation please see part 2 (8:10)

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Assistant
  • Hammer
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 34mm Socket
  • 15mm Socket
  • 21mm Socket
  • 11mm Socket

  • Specialty Tools

  • Pitman Arm Puller

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Excellent problem resolution
My order was one part short of what was listed as being in the kit. I called the 800 number, on the weekend, and had my missing part on Tuesday. You couldn't ask for any better service. EXCELLENT!!
April 4, 2018
Purchased
4 months ago
Great Parts, Great Price
I bought this set for my 97' chevy 2500 and they were packaged well and in great condition. I was able to install them on my front driveway with no problems. I will definitely buy again from 1A Auto.
April 9, 2017
Purchased
1 year ago
Steering and suspension parts
All parts arrived in a timely manner. Everything fit and worked perfectly on the truck. I would recommend this company to anyone. Good job.
January 23, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 6 answers
Are these parts for a 1997 Chevy Silverado c1500?
Bob W on Jun 16, 2017
BEST ANSWER: Sorry it took so long to respond but i used them on my 98 chevy and they were great. I'm pretty sure they'll fit a 97 as well. Happy fixing!

Vehicle Fit

  • 1993-1999 Chevy C1500 Truck 10 Piece Set Steering & Suspension Kit
  • 1993-2000 Chevy C2500 Truck 10 Piece Set Steering & Suspension Kit
  • 1993-2000 Chevy C3500 Truck 10 Piece Set Steering & Suspension Kit for Models with Independent Front Suspension
  • 1993-1999 Chevy Suburban C1500 10 Piece Set 2 Wheel Drive Steering & Suspension Kit
  • 1993-1999 Chevy Suburban C2500 10 Piece Set 2 Wheel Drive Steering & Suspension Kit
  • 1995-1999 Chevy Tahoe 10 Piece Set 2 Wheel Drive Steering & Suspension Kit
  • 2000 Chevy Tahoe 10 Piece Set 2 Wheel Drive Steering & Suspension Kit V8 5.7L
  • 1993-1999 GMC C1500 Truck 10 Piece Set Steering & Suspension Kit
  • 1993-2000 GMC C2500 Truck 10 Piece Set Steering & Suspension Kit
  • 1993-2000 GMC C3500 Truck 10 Piece Set Steering & Suspension Kit for Models with Independent Front Suspension
  • 1993-1999 GMC Suburban C1500 10 Piece Set Steering & Suspension Kit
  • 1993-1999 GMC Suburban C2500 10 Piece Set Steering & Suspension Kit
  • 1995-1999 GMC Yukon 10 Piece Set 2 Wheel Drive Steering & Suspension Kit
  • 2000 GMC Yukon 10 Piece Set 2 Wheel Drive Steering & Suspension Kit V8 5.7L

This part replaces:

  • OE # 26048561, 7839709, 8260485610
  • OE # 26051896
  • Moog ES2004S
  • Moog K6447
  • Moog K6335
  • Moog ES2836RL
  • Moog K6445
  • Moog ES2837RL
Part #: 1ASFK02553

How-to Video:

(08:32 min)