Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

 

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    NOTE: After completing the procedure you will need a professional alignment

  1. step : Removing the Wheel (0:47)
    • Loosen the 22mm caps on the hubcap with the vehicle on the ground
    • Pull the hubcap free
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Upper Control Arm (1:10)
    • Mark the tab on the adjustment piece with a marker to mark the alignment
    • Remove the two 10mm bolts holding the brake line and move the brackets
    • Remove the ball joint nut with an 18mm wrench
    • Hit the wheel knuckle and control arm to break them free
    • Remove the 21mm nuts from the upper control arm bracket
    • Jack up the wheel underneath the wheel knuckle
    • Remove the upper control arm nut
    • Remove the bolts and upper control arm bracket
    • Place a nut back on and use an air hammer to knock the bolt out if it won't budge
    • Move the control arm up and down while pulling out
  3. step : Installing the Upper Control Arm (3:52)
    • Put the upper control arm into place and push the 21mm bolts in to hold it
    • Put the brackets on either side and realign them up
    • Angle the control arm down into the wheel knuckle
    • Replace the 18mm ball joint nut
    • Replace the 21mm nuts from the upper control arm bracket
    • Replace and tighten the two 10mm bolts
    • Put a grease gun into place on the end of the control arm and fill it up
  4. step : Reattaching the Wheel (6:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the hubcap and tighten the caps

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 18mm Wrench
  • 21mm wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Silverado steering and suspension kit
Quality parts, Great price, and free shipping!!! Rebuilt the whole front end of my 2002 silverado for a quarter of the price a shop wanted for just an upper ball joint replacement. Will use 1a auto in the future for sure! Thanks
March 19, 2017
Purchased
11 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Are the lower ball joints serviceable?
CJ H on Oct 19, 2016
BEST ANSWER: no

How-to Video:

(07:07 min)

Tools List:

    General Tools

  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 18mm Wrench
  • 21mm wrench



This part replaces:

  • Dorman 520-116
  • Hollander 511-01044
  • Moog K80942
  • OE # 15295861, 26059210
  • OE # 12475478
  • OE # 15864153, 12475485, 15047200
  • OE # 19149617
  • Moog ES3493T
  • Moog K6541
  • Moog ES3488

Vehicle Fit

  • 2002-2006 Cadillac Escalade 8 Piece Set Steering & Suspension Kit
  • 2003-2006 Cadillac Escalade ESV 8 Piece Set Steering & Suspension Kit
  • 2002-2006 Cadillac Escalade EXT 8 Piece Set Steering & Suspension Kit
  • 2002-2006 Chevy Avalanche 1500 8 Piece Set Steering & Suspension Kit
  • 1999-2006 Chevy Silverado 1500 4 Wheel Drive 8 Piece Set Steering & Suspension Kit
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive 8 Piece Set Steering & Suspension Kit
  • 2000-2006 Chevy Suburban 1500 8 Piece Set Steering & Suspension Kit
  • 2000 Chevy Tahoe 8 Piece Set Steering & Suspension Kit excluding Z71 Models
  • 2001-2006 Chevy Tahoe 8 Piece Set Steering & Suspension Kit
  • 1999-2006 GMC Sierra 1500 4 Wheel Drive 8 Piece Set Steering & Suspension Kit
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive 8 Piece Set Steering & Suspension Kit
  • 2000 GMC Yukon 8 Piece Set Steering & Suspension Kit excluding Denali Models
  • 2001-2006 GMC Yukon 8 Piece Set Steering & Suspension Kit
  • 2000-2006 GMC Yukon XL 1500 8 Piece Set Steering & Suspension Kit
Part #: 1ASFK02451

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More