Specifications:

  • Brand New Suspension & Steering Kit
  • Comes as a Set of 14
  • Fits LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:03)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:24)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Measure the distance from the end of the boot to the center of the tie rod end
    • Note that measurement
    • Loosen the tie rod lock nut with a 15/16" wrench
    • Loosen the 21mm nut from the tie rod
    • Strike the steering knuckle with a hammer to loosen it
    • Lift the tie rod end out of the steering knuckle
    • Twist off the outer tie rod by hand
  3. step : Installing the Outer Tie Rod (2:18)
    • Twist on the outer tie rod
    • Push the tie rod into the steering knuckle
    • Thread the 22mm castle nut onto the tie rod by hand
    • Measure the distance from the end of the boot to the center of the tie rod end
    • This should be the same as the measurement from Step 2
    • Twist the grease fitting into the tie rod
    • Tighten the castle nut to 50-55 foot-pounds of torque
    • Put the cotter pin into the castle nut
    • Twist on the cotter pin with pliers
    • Hold the inner tie rod with a 16mm wrench
    • Tighten the locking nut with a 15/16" wrench
    • Add grease to the tie rod with a grease gun
  4. step : Reattaching the Wheel (4:24)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100-110 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 16mm Wrench

  • Wrenches - SAE

  • 15/16 Inch Wrench

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
Exact fit!
I put these parts on a friend's truck who was told by a repair shop that the truck needed over $2000 dollars worth or repairs. I replaced all these suspension and steering components without any fitment issues. I also used this same kit on my suburban almost a year ago and still rides as good as the day I put them on. I would definitely recommend this kit if you need parts. Great price with great quality! Happy customer!!
December 25, 2017
Purchased
4 months ago
Me A
Everything fit perfect and my parts kit came in on time, the only thing was three of the box’s were opened not sure if it was the shipping co. or not but the packages should of been stronger.
January 26, 2018
Purchased
1 month ago
Thank you for the service, everything went as planned, from ordering, receiving the parts and costumer service was fenomenal, great work and thank you again! Keep up the great work! God bless!
January 22, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 8 answers
What brand are the parts in part#1ASFK02413?
Nathan B on Mar 11, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
Do you have this bundle for 2007 Yukon denali?
Dan S on Mar 9, 2017
BEST ANSWER: This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit. Please feel free to call our customer service department for clarification @ 888-844-3393.
what brand wheel bearing are you using?
Chris on Mar 22, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a two year warranty. If you have any further questions, please don't hesitate to ask.
I have an 07 Tahoe LTZ 4x4. Will this kit work on my SUV and are parts OEM or better?
Arthur on Apr 10, 2017
BEST ANSWER: I have a 4x4 and they have worked great. No issues and oem quality without the high price. Don't hesitate to buy from 1aauto I've been customer for years now and have nothing but positive experiences.
Do you carry something similar to this kit for a 2011 Silverado 4x4?
Arthur on Apr 10, 2017
BEST ANSWER: Please view our steering and suspension kits at https://www.1aauto.com/2011-chevy-silverado-1500-brake-steering-suspension-kits/y-mo-c/2011-1716-377?partTypeFld=Steering+%26+Suspension+Kit for your 2011 Silverado 4WD.
Where it says "THIS PART REPLACES", does that mean those are the parts included in the kit or they are replacing the OEM parts on the SUV?
Arthur on Apr 10, 2017
BEST ANSWER: When we refer to "This part replaces" it means the cross reference OEM numbers to ensure you are getting the appropriate parts.

How-to Video:

(05:10 min)

Tools List:

    General Tools

  • Jack Stands
  • Floor Jack
  • Hammer

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 21mm Socket
  • 22mm Socket

  • Specialty Tools

  • Grease Gun

  • Wrenches - Metric

  • 16mm Wrench

  • Wrenches - SAE

  • 15/16 Inch Wrench



This part replaces:

  • Dorman 521-024
  • Hollander 511-00358R
  • Hollander 538-00128
  • Hollander 447-00186
  • OE # 12475478
  • OE # 25812726
  • OE # 25918329, 10393171
  • OE # 25918049
  • OE # 15868123
  • Moog K6541
  • Moog ES800223
  • Moog K80669
  • Moog K80670
  • Moog EV800084
  • Moog K700432
  • A1 Cardone 66-1430
  • Dorman 521-023
  • Hollander 511-00359L
  • OE # 25812725
  • OE # 15254060
  • OE # 15254061

Vehicle Fit

  • 2007-2013 Cadillac Escalade 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2013 Cadillac Escalade ESV 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2013 Cadillac Escalade EXT 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2013 Chevy Avalanche 1500 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007 Chevy Silverado 1500 New Body Style 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2008-2013 Chevy Silverado 1500 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2013 Chevy Suburban 1500 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2014 Chevy Tahoe 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2014 GMC Savana 1500 Van 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007 GMC Sierra 1500 New Body Style 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2008-2013 GMC Sierra 1500 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2014 GMC Yukon 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
  • 2007-2013 GMC Yukon XL 1500 4 Wheel Drive 14 Piece Set Steering & Suspension Kit for Models with Stamped Steel Lower Control Arms
Part #: 1ASFK02413

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More