Specifications:

  • Comes as a 8 piece kit
  • Includes:
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - Front Sway Bar End Links - LH (Driver Side) & RH (Passenger Side)
    • (2) - Front Lower Ball Joints - LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

 

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Front Inner Tie Rods
  • Quantity: 8 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Raise and secure the vehicle (1:23)
    • Lift and secure your vehicle with its model specific safe support points.
    • Make sure your jack stands are set and the correct height on an even surface and your e brake is on if all four wheels aren’t off the ground.
  2. step : Remove the stabilizer link (2:45)
    • Use a wrench to secure the top of the link and a socket and breaker bar on the bottom.
    • Remove the stabilizer link.
  3. step : install the new stabilizer link (3:16)
    • Thread the stabilizer link, bushings and washers into the control arm and sway bar.
    • Use your wrench to secure the link and a socket and ratchet to tighten it up.
    • The torque spec is 13 foot lbs.

Tools needed for replacement:

    Ratchets & Related

  • Torque Wrench

  • Sockets - Metric

  • Complete Metric Socket Set

  • Wrenches - Metric

  • Complete Metric Wrench Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Chevy Classic Front Steering & Suspension Kit 8 Piece Set
  • 1997-1998 Chevy Malibu Front Steering & Suspension Kit Tie Rod with Internal Threads 8 Piece Set
  • 1999-2003 Chevy Malibu Front Steering & Suspension Kit 8 Piece Set
  • 1999-2004 Olds Alero Front Steering & Suspension Kit 8 Piece Set
  • 1997-1998 Olds Cutlass Front Steering & Suspension Kit Tie Rod with Internal Threads 8 Piece Set
  • 1999 Olds Cutlass Front Steering & Suspension Kit 8 Piece Set
  • 1999-2005 Pontiac Grand Am Front Steering & Suspension Kit 8 Piece Set

This part replaces:

  • Moog K6527
  • Moog EV408
  • Moog K6600
  • Moog ES3455
  • OE # 22156939
Part #: 1ASFK02384

How-to Video:

(06:25 min)