Specifications:

  • Comes as a Set of 6
    • (2) - Control Arms with Ball Joints - LH (Driver Side) & RH (Passenger Side) Front Lower
    • (2) - Tie Rod Ends - LH (Driver Side) & RH (Passenger Side) Front Outer
    • (2) - Tie Rod Ends - LH (Driver Side) & RH (Passenger Side) Front Inner
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 7 answers
When you replace control arm do the tie rods normally needs replacing also?
Ronald W on Nov 27, 2017
BEST ANSWER: For my car Dodge Caliber, i believe we replaced tie rods & control arm together, my car eats away at the tie rods & it started affecting the arm. My husband & his friend fixed alot of my front end. If the tie rods look worn down i would since you already have that wheel off. I took my car to GoodYear & they gave me a LONG list of issues with my car & from there i bought all the pieces from 1A Auto needed (they had the pieces on the list of issues) & had a good friend of my husbands fix it all up for me. I hope this helps!
Are these ball joints greaseable?
keith m on Mar 29, 2016
BEST ANSWER: No but most ball joints that I priced for a caliber aren't anyways
Will this fit/work for a caliber srt4 model?
Gabe R on May 31, 2017
BEST ANSWER: Yes, these will work.

Vehicle Fit

  • 2007-2012 Dodge Caliber Steering & Suspension Kit
  • 2007-2014 Jeep Compass (MK) Steering & Suspension Kit
  • 2007-2014 Jeep Patriot (MK) Steering & Suspension Kit

This part replaces:

  • Dorman 521-108
  • Dorman 521-109
  • OE # 5183761AA, 5183761AB, 5183761A
  • OE # 5105040AB, 5105040AC, 5105040AE, 5105040AG
  • OE # 5105041AC, 5105041AE, 5105041AG
  • Moog K620065
  • Moog EV80645
  • Moog ES800408
  • Moog K620066
  • Hollander 512-00505R
  • Hollander 512-00506L
  • OE # 5105040AB, AC, AE, AG
  • OE # 5105041AC, AE, AG
Part #: 1ASFK02312