These replacement suspension parts are just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • FRONT Suspension Kit includes:
    • (2) - FRONT UPPER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT LOWER Ball Joints - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT INNER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (2) - FRONT OUTER Tie Rod Ends - LH (Driver Side) & RH (Passenger Side)
    • (1) - FRONT Pitman Arm (3 Groove design)
    • (1) - FRONT Idler Arm
  • Direct replacements
  • Built to strict quality control standards
  • Fits models with 3 Groove Design Pitman Arm
  • Do not fit models with Rack & Pinion Steering

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 10 Piece Set
  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (1) Idler Arm
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (1) Pitman Arm
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Removing the Wheel (0:47)
    • Pry off the wheel cover by hand
    • Loosen the lug nut covers with a 21mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:19)
    • Turn the brake rotor by hand or turn the steering wheel to turn the rotor
    • Loosen the tie rod with an adjustable wrench
    • Straighten out the castle nut pin with pliers
    • Remove the pin
    • Remove the 21mm castle nut from the ball joint
    • Strike the wheel knuckle with a hammer to loosen the tie rod end
    • Pull the tie rod out of the wheel knuckle
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • Note that measurement
    • Twist off the outer tie rod
  3. step : Installing the Outer Tie Rod (2:39)
    • Twist the outer tie rod onto the inner tie rod
    • Measure the distance from the base of the inner tie rod to the end of the outer tie rod
    • This should be the same as the measurement from Step 2
    • Push the ball joint into the steering knuckle
    • Fasten the castle nut onto the ball joint
    • Push the pin through the castle nut
    • Bend the pin into place with pliers
    • Tighten the tie rod with an adjustable wrench
  4. step : Reattaching the Wheel (4:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 21mm socket
    • Push on the wheel cover

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Needle nose pliers

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 21mm Socket
  • 7mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 3 answers
Will this fit a base model 03 silverado 1500 ext cab 5.3L?
Nathan F on May 16, 2018
BEST ANSWER: No this will only fit a 1500 HD.
what is the quality and specs of these products ?
Kyle C on Jul 12, 2016
BEST ANSWER: These are designed to meet OE specs and carry a lifetime warranty against manufacturer defects
Will these fit a 2003 Seirra 5.3L stepside?
Stefan D on Feb 10, 2016
BEST ANSWER: Hello, Your vehicle info is ok however the main details you need to confirm before purchasing are these details:
Fits models with 3 Groove Design Pitman Arm
Do not fit models with Rack & Pinion Steering

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 10 Piece Set Steering & Suspension Kit
  • 2001-2003 Chevy Silverado 1500 HD 10 Piece Set Steering & Suspension Kit
  • 2005-2006 Chevy Silverado 1500 HD 10 Piece Set Steering & Suspension Kit
  • 2007 Chevy Silverado 1500 HD Classic 10 Piece Set Steering & Suspension Kit
  • 2001-2004 Chevy Silverado 2500 10 Piece Set Steering & Suspension Kit
  • 2001-2006 Chevy Silverado 2500 HD 10 Piece Set Steering & Suspension Kit
  • 2007 Chevy Silverado 2500 HD Classic 10 Piece Set Steering & Suspension Kit
  • 2001-2006 Chevy Silverado 3500 10 Piece Set Steering & Suspension Kit
  • 2007 Chevy Silverado 3500 Classic 10 Piece Set Steering & Suspension Kit
  • 2001-2006 Chevy Suburban 2500 10 Piece Set Steering & Suspension Kit
  • 2001-2003 GMC Sierra 1500 HD 10 Piece Set Steering & Suspension Kit
  • 2005-2006 GMC Sierra 1500 HD 10 Piece Set Steering & Suspension Kit
  • 2007 GMC Sierra 1500 HD Classic 10 Piece Set Steering & Suspension Kit
  • 2001-2004 GMC Sierra 2500 10 Piece Set Steering & Suspension Kit
  • 2001-2006 GMC Sierra 2500 HD 10 Piece Set Steering & Suspension Kit
  • 2007 GMC Sierra 2500 HD Classic 10 Piece Set Steering & Suspension Kit
  • 2001-2006 GMC Sierra 3500 10 Piece Set Steering & Suspension Kit
  • 2007 GMC Sierra 3500 Classic 10 Piece Set Steering & Suspension Kit
  • 2001-2006 GMC Yukon XL 2500 10 Piece Set Steering & Suspension Kit
  • 2003-2007 Hummer H2 10 Piece Set Steering & Suspension Kit

This part replaces:

  • Moog ES3609
  • Moog K6535
  • Moog K6693
  • Moog K6654
  • Moog ES3488
  • Moog K6696
  • OE # 15891516
  • OE # 12479051
  • OE # 15891515
  • OE # 15295861, 26059210
  • OE # 25905442
Part #: 1ASFK02061


Order must be placed by 4pm ET

How-to Video:

(04:55 min)