Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as an 8 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Sway bar length 11.80" 300mm
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the top of the strut (1:07)
    • Lift the hood and secure it.
    • Remove the three 13 mm nuts in the engine bay securing the top of the strut.
    • Keep two of them loosely threaded just to keep the strut from flopping around while you work on the bottom half.
  2. step : Remove the wheels (1:37)
    • Use a 19 mm lug wrench to loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the lug nuts and set the wheel aside.
  3. step : Remove the stabilizer link (2:03)
    • Use an 18 mm wrench and an 18 mm socket and ratchet to remove the stabilizer link.
    • A breaker bar can help get it loose, using the wrench to secure the back of the bolt.
  4. step : Remove the bottom of the strut (3:01)
    • Apply some penetrating oil to the two 18 mm nuts securing the strut to the steering knuckle.
    • Work the bolts out of the steering knuckle and strut.
    • Unthread the top two nuts and pull the strut down and out.
  5. step : Install the new strut (4:35)
    • Put the strut into place and thread one of the bolts through the bottom of the strut and the steering knuckle.
    • This secures the strut so you can secure the top three nuts.
    • Torque the two bolts at the bottom to 100 ft lbs.
    • Reassemble the stabilizer link.
    • Replace the wheel, using a star pattern on the lug nuts.
    • Torque the top three nuts to 20 ft lbs.
    • Torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 16mm Socket
  • 15mm Socket
  • 19mm Socket
  • 13mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Fast delivery,great deal.
Parts fit great. Buying the kit was a big money saver.
April 9, 2017
Purchased
11 months ago
Excellent Package
This suspension package was exactly what my 113k mile Cobalt needed. The original shocks and struts were just about completely shot. So this completely corrected the rough ride not to mention the increased steering tightness/ input. It now rides like a new car again! Shipping was also super snappy.
August 6, 2017
Purchased
7 months ago
The parts are great but after the change out I have a noise that I can not identify. I would definitely recommend the parts to everyone.
February 13, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
What brand is this set of shocks and struts?
Summers on Jun 20, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
What length are the sway bar end links?
Brian S on Jun 27, 2017
BEST ANSWER: I don't have the exact measurements. Our parts are designed to be exact replacements for what came with the vehicle, so as long as your year, make, and model match up with our listing, these will definitely fit and function just like the original. Please let us know if you have any other questions.

How-to Video:

(07:21 min)

Tools List:

    General Tools

  • Hammer
  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 16mm Socket
  • 15mm Socket
  • 19mm Socket
  • 13mm Socket
  • 18mm Socket

  • Wrenches - Metric

  • 18mm Wrench



This part replaces:

  • OE # 22664783
  • OE # 15220347
  • OE # 15140337
  • OE # 20784686
  • OE # 20794267
  • OE # 20794268
  • OE # 22696400
  • OE # 22728821
  • Moog K80252
  • Moog ES800030
  • OE # 22664783, 15220347, 15140337
  • Monroe 182179L
  • Monroe 182179R
  • Monroe 172179L
  • Monroe 172179R
  • Monroe 5779
  • KYB 349043
  • KYB SR4057
  • KYB SR4056

Vehicle Fit

  • 2005-2009 Chevy Cobalt 8 Piece Set Steering & Suspension Kit 300mm Front Sway Bar Links for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2006-2010 Chevy HHR excluding SS Models 8 Piece Set Steering & Suspension Kit 300mm Front Sway Bar Links for Models without RPO Code FE5 (Performance Ride Handling Suspension)
  • 2007-2009 Pontiac G5 8 Piece Set Steering & Suspension Kit 300mm Front Sway Bar Links for Models without RPO Code FE5 (Performance Ride Handling Suspension)
Part #: 1ASFK01869

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More