Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 13 Piece Kit
    •  Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:30)
    • Loosen the lug nuts.
    • Raise and secure the vehicle.
    • Remove the wheel.
  2. step : Remove the tie rod assembly (2:00)
    • Remove the tie rod bolt.
    • Use a pickle fork and hammer to separate it.
    • Use an adjustable wrench and a fitted wrench to remove the tie rod assembly.
  3. step : Install the new tie rod assembly (4:00)
    • Adjust your new tie rod assembly to match the old one for a preliminary alignment.
    • Mount the new tie rod assembly and tighten it in with a wrench.
    • Tighten the nut on the tie rod stud to 65 ft lbs.
    • Install the cotter pin.
    • Use a 7 mm wrench to install the grease fitting
    • With a grease gun, grease the inner and outer joints.
  4. step : Put the wheel back on (7:00)
    • Preliminarily tighten the lug nuts.
    • Lower the car and torque the lug nuts to 120 ft lbs using a star pattern.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Rubber Mallet

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 35mm Socket
  • 7mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
quality at low price
had pretty much everything you need. came with castle nuts and cotter pins. same quality you'd expect from economy sets from you normal auto stores. everything was made from cast steel and then machined. no flimsy aluminum or plastic as I've seen in some other cases. worked out well, best price ever! I drive high mileage vehicles and highly reccommend these for that or budget. I would still got with moog if you are doing a front end on a 5 year or newer car. I think these will last me another 3 to 5 years which is probably longer than my yukon will.
September 14, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this fit a 2002 tahoe with aluminum lower control arms and a 4 spline pitman?
David W on May 18, 2016
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.

How-to Video:

(07:45 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Rubber Mallet

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench
  • Lug Wrench
  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 35mm Socket
  • 7mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller



This part replaces:

  • OE # 15295861, 26059210
  • OE # 12475478
  • OE # 19149615
  • OE # 12471378, 19149615
  • OE # 12471379
  • OE # 19149617
  • OE # 12475486
  • Moog ES3493T
  • Moog K6541
  • Moog K6540
  • Moog K80631
  • Moog K6723
  • Moog ES3488
  • Moog K6534
  • Moog K6536

Vehicle Fit

  • 2002-2006 Cadillac Escalade 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
  • 2003-2006 Cadillac Escalade ESV 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
  • 2002-2006 Cadillac Escalade EXT 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
  • 2002-2006 Chevy Avalanche 1500 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
  • 1999-2006 Chevy Silverado 1500 4 Wheel Drive 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm excluding Crew Cab
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm excluding Crew Cab
  • 2000-2006 Chevy Suburban 1500 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
  • 2000 Chevy Tahoe 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm excluding Z71 Models
  • 2001-2006 Chevy Tahoe 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
  • 1999-2006 GMC Sierra 1500 4 Wheel Drive 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm excluding Crew Cab
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm excluding Crew Cab
  • 2000 GMC Yukon Steering & Suspension Kit 13 Piece Set for Models with 4 Groove Pitman Arm excluding Denali Models
  • 2001-2006 GMC Yukon 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
  • 2000-2006 GMC Yukon XL 1500 13 Piece Set Steering & Suspension Kit for Models with 4 Groove Pitman Arm
Part #: 1ASFK01807

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More