• Brand New Steering & Suspension Kit
  • Comes as a 14 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. step : Remove the front shield (1:15)
    • Use a 15 mm socket and ratchet.
    • Remove the four bolts.
  3. step : Remove the Idler Arm (1:25)
    • Remove the 24 mm bolt securing the idler arm to the steering linkage
    • Use a joint fork and a hammer to separate the joint.
    • Remove the three other bolts securing the idler arm.
    • Use a Tie Rod Puller to pull apart the idler arm and the idler shaft.
  4. step : Install the new idler arm (4:34)
    • Assemble your new idler arm to your idler shaft, threading on the bushing and nut.
    • Bolt in the idler arm assembly into place, tightening up the three nuts.
    • Bolt in the end of the idler arm assembly to the steering gear.
    • Torque the nuts and bolts to 80 ft lbs.
    • Install the cotter pin.
    • Use a grease gun and fill the grease fitting.
  5. step : Reassembly (7:25)
    • Replace the shield with the four 15mm bolts.
    • Clip the air bag harness back in.
    • Put the wheel back on and lower the car
    • Using a star pattern torque the lug nuts to 120-140 ft lbs

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 22mm Socket
  • 24mm Socket

  • Specialty Tools

  • Grease Gun
  • Tie Rod Fork
  • Tie Rod Puller

  • Wrenches - Metric

  • 18mm Wrench

5.0 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Front end rebuild
Kit came as advertised at a portion of the cost as well as proper fit for the vehicle I ordered it, I have stored this source for future purchases and will definitely check pricing and availability before buying anywhere else
April 11, 2018
1 month ago
Great stuff, was a little skeptical, but the price was to good not to try. All the parts fit like a glove. No regrets, no problems
March 6, 2018
2 months ago
Suspension kit
Nicely machined parts. Great saving on buying this kit.

Kevin B
February 23, 2018
2 months ago
Suspension parts review
Had to order some lower ball joints. found all the parts that I needed very easily the delivery was fast and the parts were amazing I would recommend A-1 Auto to all my friends and family you guys made my job and my life way easier thank you for what you guys do. lifetime customer!
April 18, 2018
3 weeks ago
Thank you .
Very convenient ordering, timely delivery, very good prices.
I will definitely order from here again.
March 17, 2018
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 6 answers
Front suspension kits does the bushings come in the kit 1AFSK01584...?
Lani or E on Dec 9, 2015
BEST ANSWER: This will come with everything listed in the specifications at the bottom of the listing. It looks like everything will come with the ball joints, but none have bushings existing to replace. Thank you and have a great day!
How long until you restock this item?
Chris D on Jul 26, 2017
BEST ANSWER: I don't have anything to do with stocking so unfortunately I can't help your question however I light the item and it works great for a great price!
Do the ball joints and tie rods have grease fittings?
Brando on May 11, 2016
BEST ANSWER: These will generally come as sealed units.

Vehicle Fit

  • 1993-1999 Chevy C1500 Truck 14 Piece Set Steering & Suspension Kit
  • 1993-2000 Chevy C2500 Truck 7200LB GVW 14 Piece Set Steering & Suspension Kit for Models with 6 Lug Wheels
  • 1993-1999 Chevy Suburban C1500 14 Piece Set Steering & Suspension Kit
  • 1995-2000 Chevy Tahoe 2 Wheel Drive 14 Piece Set Steering & Suspension Kit V8 5.7L
  • 1993-1999 GMC C1500 Truck 14 Piece Set Steering & Suspension Kit
  • 1993-2000 GMC C2500 Truck 7200LB GVW 14 Piece Set Steering & Suspension Kit for Models with 6 Lug Wheels
  • 1993-1999 GMC Suburban C1500 14 Piece Set Steering & Suspension Kit
  • 1995-1999 GMC Yukon 2 Wheel Drive 14 Piece Set Steering & Suspension Kit V8 5.7L

This part replaces:

  • Moog ES2004S
  • Moog K6292
  • Moog K6447
  • Moog K6335
  • Moog ES2836RL
  • Moog K6445
  • Moog ES2837RL
  • Moog K5252
  • OE # 26048561, 7839709, 8260485610
  • OE # 26051896
Part #: 1ASFK01584

How-to Video:

(08:13 min)