Specifications:

  • This 8 Piece Tie Rod & Sway Bar Link Kit includes:
    • (2) - FRONT INNER Tie Rod Assemblies - LH (Driver Side) & RH (Passenger Side)
      • Replaces dealer part number: 4743142AD
    • (2) - FRONT OUTER Tie Rod Assemblies - LH (Driver Side) & RH (Passenger Side)
      • Replaces dealer part number: 5066373AA
    • (2) - FRONT Sway Bar Links - LH (Driver Side) & RH (Passenger Side)
      • Replaces dealer part numbers: 4743021AA, 4743454AA, 4743669AA
    • (2) - REAR Sway Bar Links - LH (Driver Side) & RH (Passenger Side)
      • Replaces dealer part numbers: 5272190, 4721074AA
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Quantity: 8 Piece Set
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Rear Sway Bar Links
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

  1. step : Remove the wheel (1:14)
    • Loosen the lug nuts with your lug wrench.
    • Raise and secure the car.
    • Remove the lug nuts and remove the wheel.
  2. step : Remove the stabilizer link (1:35)
    • Spray the bolts with penetrating oil
    • Use a 5mm Allen wrench and an 18 mm wrench to remove the nut and bolt on the stabilizer link.
    • Repeat on the bottom.
    • Use a Sawzall to remove the stabilizer link if it is rusted on there.
    • You can rent a Sawzall at a home improvement supply store.
  3. step : install the new stabilizer links (6:20)
    • Put the stabilizer link in place and use your wrench to bolt the locking lug nuts on.
  4. step : Put the wheel back on (7:38)
    • Hand-tighten the lug nuts and then lower the car.
    • Refer to the owner’s manual to torque the lug nuts to the correct ft lbs.
    • Use a star pattern.

Tools needed for replacement:

    Allen Wrenches

  • 5/16 Inch Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Wrenches - SAE

  • 3/4 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2004Chrysler Town & Country Chrysler Town & Country Steering & Suspension Kit 8 Piece Set
2001-2003Chrysler Voyager Chrysler Voyager Steering & Suspension Kit 8 Piece Set
2001-2004Dodge Caravan Dodge Caravan Steering & Suspension Kit 8 Piece Set
2001-2004Dodge Grand Caravan Dodge Grand Caravan Steering & Suspension Kit 8 Piece Set

This part replaces:

  • Moog K7301
  • Moog K7258
  • Moog ES3537
  • Moog EV405
  • OE # 5272190
  • OE # 4743142AD
  • OE # 5066373AA
Part #: 1ASFK01299


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:55 min)